EVILTO RGB Digital Alarm Clock (Model RGBNZ) User Manual

1. Sarrera

The EVILTO RGB Digital Alarm Clock is designed to provide clear time display, dual alarm functionality, and ambient lighting options. It features a high-contrast screen that shows time, temperature, date, and day of the week. With customizable RGB display colors and ambient light settings, it complements various room decors while offering practical features like Daylight Saving Time (DST) adjustment and power-outage memory.

2. Segurtasun-argibideak

• Ensure the device is placed on a stable, flat surface to prevent falling.
• Keep away from water or high humidity environments to avoid electrical hazards.
• Do not expose to direct sunlight or extreme temperatures.
• Erabili emandako korronte-egokitzailea eta kablea soilik.
• Mantendu haurren eskura.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if needed.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• EVILTO RGB Digital Alarm Clock Unit
• USB-C korronte kablea
• Elikatze-moldagailua
• Erabiltzailearen eskuliburua

4. Produktua amaitu daview

The alarm clock features a large digital display and intuitive controls. Familiarize yourself with the main components and buttons:

1. irudia: Aurrealdea view of the EVILTO RGB Digital Alarm Clock, showing the time, temperature, date, and day of the week. The display features vibrant RGB colors.

2. Irudia: Atzealdea view of the EVILTO RGB Digital Alarm Clock, highlighting the control buttons for settings, alarms, display, and the USB-C input and USB output ports.

Kontrol-botoiak:

• SET botoia: Enters/confirms settings.
• Distira botoia: Pantailaren distira doitzen du.
• RGB botoia: Cycles through RGB display colors.
• Alarma 1/2 botoiak: Activates/deactivates and sets Alarm 1 or Alarm 2.
• Bolumen-botoia: Alarmen bolumena doitzen du.
• DST Button: Toggles Daylight Saving Time.
• 12/24H Button: Switches between 12-hour and 24-hour time format.
• °C/°F botoia: Switches between Celsius and Fahrenheit for temperature display.

5. Konfigurazioa

5.1 Gailua piztea

The alarm clock operates via a corded electric connection. For power-outage memory, install 3 AAA batteries (not included).

1. Connect the USB-C power cable to the INPUT port on the back of the clock.
2. Entxufatu korronte-egokigailua entxufe elektriko estandar batean.
3. For backup power, open the battery compartment on the back and insert 3 AAA batteries, ensuring correct polarity.

Figure 3: The clock connected via USB-C for power, demonstrating its USB output for charging other devices.

Figure 4: Illustration of the power-outage memory function, showing the battery compartment for AAA batteries to retain settings during power interruptions.

6. Funtzionamendu-argibideak

6.1 Ordua eta data ezartzea

1. Eduki sakatuta EZARTU button on the back of the clock for 3 seconds to enter time setting mode. The hour digits will begin to flash.
2. Erabili + eta - ordua doitzeko botoiak.
3. Sakatu EZARTU berriro minutuen ezarpenera joateko. Erabili + eta - minutuak egokitzeko.
4. Jarraitu sakatzen EZARTU urte, hilabete eta egun ezarpenak zeharkatzeko, bakoitza doituz + eta -.
5. Sakatu EZARTU azken aldiz ezarpen modutik irteteko.
6. To switch between 12-hour and 24-hour format, short press the 12/24H botoia.
7. To switch between Celsius and Fahrenheit, short press the ° C / ° F botoia.

6.2 Alarmak ezartzea

The clock supports two independent alarms with four modes (Daily, Weekday 1, Weekday 2, Weekend).

1. Eduki sakatuta 1. alarma or 2. alarma botoia 3 segundoz alarma ezartzeko moduan sartzeko. Orduko digituak keinuka hasiko dira.
2. Erabili + eta - botoiak nahi duzun alarmaren ordua ezartzeko.
3. Sakatu Alarma button again to set the minutes, adjusting with + eta -.
4. Sakatu Alarma button a third time to select the alarm mode (Daily, Weekday 1, Weekday 2, Weekend) using + eta -.
5. Sakatu Alarma button one last time to confirm and exit.
6. To activate or deactivate an alarm, short press its respective 1. alarma or 2. alarma button. An icon will appear/disappear on the display.
7. Alarma jotzen duenean, sakatu SNOOZE button (top center) to activate snooze for 5 minutes. To turn off the alarm, press any other button.

Figure 5: The clock illustrating the setup for dual alarms with options for daily, weekday, or weekend modes.

6.3 Adjusting Display and Ambient Light

1. Pantailaren distira: Sakatu laburra Distira button on the back to cycle through 5 adjustable brightness levels for the main display.
2. RGB Display Colors: Sakatu laburra RGB button on the back to cycle through 15 vibrant RGB display colors, including 4 dynamic RGB modes, 7 regular colors, and 4 specific color options.
3. Giro-argiztapena: The clock features 10 ambient lighting options. These can be adjusted independently from the main display colors. Refer to the specific instructions in the included manual for ambient light control.

Figure 6: Various display color options and brightness levels of the digital alarm clock.

6.4 Daylight Saving Time (DST) Adjustment

To adjust for Daylight Saving Time, simply press the DST button on the back of the clock. This will move the time forward or backward by 1 hour, keeping your clock synchronized with seasonal changes.

7. Mantentzea

• Clean the clock's surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• If the display appears scratched, gently remove any protective film that may be present.
• Ensure the USB-C port and USB output port are free from dust and debris.

8. Arazoak

8.1 Pantaila ez da pizten

• Check if the power cable is securely connected to both the clock and the power outlet.
• Ziurtatu korronte-egokigailua behar bezala funtzionatzen duela.
• If using battery backup, ensure batteries are correctly inserted and not depleted. Note that the display will not stay on continuously when running on battery power alone; it will only light up briefly when a button is pressed or an alarm sounds.

8.2 Alarmak ez du jotzen

• Verify that the alarm is activated (alarm icon visible on the display).
• Check the alarm volume setting using the Bolumena botoia.
• Ensure the alarm time and mode are set correctly.

8.3 Ordu/data okerra

• Re-enter the time and date settings as described in Section 6.1.
• If DST is active, ensure it is correctly set for your region.

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided in the product packaging or contact EVILTO customer service directly. Keep your purchase receipt for warranty claims.