Genmitsu Kortek 5W Laser Engraver and Fume Extractor Instruction Manual

1. Segurtasun informazio garrantzitsua

Read all safety warnings and instructions carefully before operating the Genmitsu Kortek 5W Laser Engraver and Fume Extractor. Failure to follow these instructions may result in serious injury, fire, or property damage.

Laser erradiazioa: This product contains a Class 1 laser. Avoid direct exposure to the laser beam. Always wear the provided laser safety goggles during operation.
Sute arriskua: Laser engraving and cutting can generate heat and sparks, potentially causing fires. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
Aireztapena: Always use the fume extractor to remove smoke and harmful fumes produced during laser processing. Ensure adequate ventilation in your workspace.
Materialen bateragarritasuna: Only engrave or cut materials specified as safe for laser processing. Avoid materials that produce toxic fumes or are highly flammable (e.g., PVC, vinyl).
Haurrak eta maskotak: Keep children and pets away from the laser engraver and fume extractor during operation.
Elikatze-iturria: Use only the power adapter supplied with the device. Ensure the power source matches the specified voltage.
Larrialdi geldialdia: Familiarize yourself with the location of the power switch and be prepared to turn off the machine immediately in case of an emergency.
Babes-ezkutua: Ensure the protective laser shield is properly installed before operation. The machine features tilt induction for added safety, stopping operation if tilted.

Genmitsu Kortek 5W Laser Engraver safety features including Class 1 laser safety, tilt induction, protective laser shield, and included laser goggles.

1. irudia: Safety features of the Genmitsu Kortek 5W Laser Engraver, including Class 1 laser safety, tilt induction, a protective laser shield, and included laser goggles for eye protection.

2. Produktua amaitu daview

The Genmitsu Kortek 5W Laser Engraver and Portable Fume Extractor system provides a comprehensive solution for precision laser engraving and cutting, coupled with effective fume management for a clean and safe workspace.

2.1. Kortek 5W Laser Engraver

The Kortek 5W laser engraver is designed for both detail and cutting capability. It features 35mm stepper motors for high repeatability and a compact, portable design.

Zehaztasuna: Achieves ±0.01mm repeatability for consistent results.
Potentzia: 5W laser module suitable for engraving and cutting various materials.
Lan eremua: 200x150 mm (7.9x5.9 inches).
Eramangarritasuna: Weighs only 1.2 kg (2.65 lbs).
Kontrola: Operable via Genmitsu APP on phone or laptop.

Goitik behera view of the Genmitsu Kortek 5W Laser Engraver showing a working area of 200mm by 150mm.

2. irudia: The working area of the Kortek 5W Laser Engraver, measuring 200mm x 150mm.

Close-up of the Genmitsu Kortek 5W Laser Engraver's 35mm stepper motor, highlighting its ultra-precise ±0.01mm repeatability.

3. irudia: The 35mm stepper motor ensures ultra-precise engraving with ±0.01mm repeatability.

Image showing the Genmitsu Kortek 5W Laser Engraver balanced against a tablet on a seesaw, illustrating its light weight of 1.2 kg (2.65 lbs).

4. irudia: The Kortek 5W Laser Engraver weighs only 1.2 kg (2.65 lbs), making it highly portable.

2.2. Portable Fume Extractor (MD2)

The portable fume extractor is designed to maintain a clean and safe working environment by filtering out smoke and odors generated during laser operations.

Iragazte-sistema: Features a robust 5-layer filter system.
Abiadura kontrola: Three adjustable speeds for customized airflow and filtration.
Funtzioa: Captures fine particles and eliminates odors.

5-ak ilustratzen dituen diagramatage multi-filtration system of the fume extractor, including Fibre Cotton, Composite Carbon A, B, C, and a HEPA cartridge.

5. irudia: 5-stage multi-filtration system of the fume extractor for comprehensive air purification.

Image of the compact fume extractor showing its dimensions (128mm x 190mm x 157mm) and controls: DV 12V Power Connector, Lock, Speed Indicator, Power Switch, and Smoking Outlet.

6. irudia: Compact design and control panel of the portable fume extractor.

Side-by-side comparison showing a laser engraving process 'Before' using the fume extractor with visible smoke, and 'After' using the fume extractor with clear air.

7. irudia: Visual comparison demonstrating the effectiveness of the fume extractor in clearing smoke during laser operation.

3. Konfiguratzeko argibideak

Follow these steps to set up your Genmitsu Kortek 5W Laser Engraver and Fume Extractor.

3.1. Desontziratzea eta ikuskatzea

Kontu handiz kendu osagai guztiak ontzitik.
Verify that all parts listed in the packing list are present and undamaged. Contact customer support immediately if any parts are missing or damaged.
Gorde jatorrizko ontzia etorkizunean biltegiratzeko edo garraiatzeko.

3.2. Laser Engraver Assembly (if required)

The Kortek 5W laser engraver typically comes pre-assembled. If minor assembly is required, refer to the quick start guide included in the box for specific instructions on attaching the laser module or gantry components.

Ziurtatu torloju guztiak ondo estututa daudela.
Confirm the laser module is correctly seated and connected.
Install the protective laser shield.

3.3. Fume Extractor Setup

Place the fume extractor on a stable surface near the laser engraver.
Connect the hose from the laser engraver's enclosure (if applicable) or position the extractor's intake near the engraving area to the "Smoking Outlet" on the fume extractor.
Ensure the filter layers are correctly installed inside the fume extractor. Refer to the filter replacement section for details on filter orientation.

3.4. Energia-konexioa

Connect the power adapter to the laser engraver's DC 24V input.
Connect the power adapter to the fume extractor's DV 12V Power Connector.
Plug both power adapters into a suitable power outlet.

3.5. Softwarearen instalazioa eta konexioa

Download the Genmitsu APP from the official webgunea edo zure gailuaren aplikazio denda.
Install the application on your phone or laptop.
Follow the in-app instructions to connect your device to the Kortek 5W laser engraver via USB or wireless connection (if supported).

4. Funtzionamendu-argibideak

This section outlines the basic steps for operating your laser engraver and fume extractor.

4.1. Grabatu/Moztu prestatzea

Laneko eremua prestatzea: Ensure your workspace is clean, well-ventilated, and free of flammable materials.
Materialaren kokapena: Place the material to be engraved or cut securely on the working platform. Ensure it is flat and within the 200x150 mm working area.
Fokuaren doikuntza: Adjust the laser focus according to the material thickness. Refer to the quick start guide for specific focusing procedures.
Segurtasun-tresna: Always wear the provided laser safety goggles before starting any operation.

Image showing the Genmitsu Kortek 5W laser module cutting 7mm pine wood in a single pass, demonstrating its cutting capability.

8. irudia: The 5W laser module is capable of cutting materials like 7mm pine wood in one pass.

4.2. Operating the Fume Extractor

Press the Power Switch on the fume extractor to turn it on.
Use the Speed Indicator button to cycle through the three adjustable speeds (low, medium, high) to match the intensity of fumes produced.
Ensure the fume extractor is running before initiating any laser operation.

4.3. Operating the Laser Engraver

Open the Genmitsu APP on your connected device.
Inportatu edo sortu zure diseinua softwarearen barruan.
Adjust laser parameters (power, speed, passes) according to the material and desired effect. Start with lower settings for new materials and gradually increase as needed.
Hasi grabatzeko edo ebaketa prozesua softwaretik.
Monitor the process closely. If any issues arise (e.g., fire, excessive smoke), immediately press the emergency stop button or power off the machine.
Once the process is complete, wait for the laser to cool down and for all fumes to be extracted before removing the material.

5. Mantentzea

Regular maintenance ensures optimal performance and extends the lifespan of your equipment.

5.1. Laser Engraver Maintenance

Lentea garbitzea: Periodically clean the laser lens with a specialized lens cleaning solution and cloth to maintain laser performance.
Makina garbitzea: Keep the working platform and gantry free of debris and dust. Use a soft, dry cloth for cleaning.
Lubrifikazioa: Apply a small amount of lubricant to the guide rails as recommended in the detailed product manual (if applicable) to ensure smooth movement.

5.2. Fume Extractor Filter Replacement

The 5-layer filtration system requires periodic filter replacement to maintain efficiency. The frequency depends on usage and the types of materials processed.

Itzali: Disconnect the fume extractor from the power source before performing any maintenance.
Sarbide-iragazkiak: Open the filter compartment (refer to the specific product diagram for access points).
Kendu iragazki zaharrak: Carefully remove the used filter layers. Dispose of them according to local regulations.
Iragazki berriak instalatu: Install new filters in the correct order:
- Fibre Cotton (1-5 um particle filtration)
- Composite Carbon A (removes harmful fumes and odors)
- Composite Carbon B (deeply removes harmful fumes and odors)
- Composite Carbon C (targeted odor removal and air regeneration)
- Ultra-high efficiency HEPA cartridge (99.95% filtration efficiency for 0.3UM particles)
Konpartimentu segurua: Close and secure the filter compartment.

6. Arazoak

Atal honek aurki ditzakezun arazo ohikoenak eta haien irtenbide posibleak jorratzen ditu.

Arazoa	Kausa posiblea	Irtenbidea
Laser engraver does not power on.	Power cable disconnected; faulty power adapter; power outlet issue.	Check power connections; try a different outlet; contact support if adapter is faulty.
Laserrak ez du pizten edo irteera ahula da.	Incorrect focus; dirty lens; incorrect software settings; laser module issue.	Adjust focus; clean the laser lens; verify power/speed settings in software; contact support.
Fume extractor not working or low airflow.	Power cable disconnected; clogged filters; fan obstruction.	Check power; replace filters; inspect fan for obstructions.
Gehiegizko kea edo usaina funtzionamenduan zehar.	Fume extractor off or on low speed; clogged filters; improper material.	Turn on/increase speed of fume extractor; replace filters; ensure material is laser-safe.
Engraving results are inconsistent.	Loose belts/components; incorrect material settings; unstable work surface.	Check for loose parts and tighten; calibrate settings; ensure stable surface.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Genmitsu customer support for further assistance.

7. Zehaztapen Teknikoak

7.1. Kortek 5W Laser Engraver

Laser potentzia: 5W
Errepikagarritasuna: ± 0.01 mm
Lan eremua: 200 x 150 mm (7.9 x 5.9 hazbeteko)
Motor mota: 35mm Stepper Motors
Pisua: 1.2 kg (2.65 lb)
Kontrol-metodoa: Genmitsu APP (Phone/Laptop)
Segurtasun Ezaugarriak: Class 1 Laser Safety, Tilt Induction, Protective Laser Shield, Laser Goggles Included
Compatible Materials (Engraving): Frosted glass, ceramic, stainless steel, wood, opaque acrylic, felt, etc.
Compatible Materials (Cutting): Wood, opaque acrylic, felt, etc.

7.2. Portable Fume Extractor (MD2)

Iragazte-sistema: 5-Layer (Fibre Cotton, Composite Carbon A/B/C, HEPA)
Iragazte-eraginkortasuna: 95% for 1-5 um particles (Fibre Cotton), 99.95% for 0.3UM particles (HEPA)
Abiadura kontrola: 3 abiadura doigarria
Pisua: 1.2 kg (approximate, based on image)
Neurriak: 128mm (W) x 190mm (D) x 157mm (H) (approximate, based on image)

8. Bermea eta Laguntza

Genmitsu products are designed for quality and reliability. For detailed warranty information, please refer to the warranty card included with your product or visit the official Genmitsu webgunea.

Bezeroarentzako laguntza:

For technical assistance, troubleshooting, or spare parts, please contact Genmitsu customer support.
Provide your product model number (Kortek 5W) and ASIN (B0FXGHJF8S) when contacting support for faster service.
Webgunea: www.sainsmart.com/pages/genmitsu (Adibample link, please verify official support channels)

	Genmitsu Kortek Laser Engraver User Guide User guide for the Genmitsu Kortek Laser Engraver, covering setup, safety, operation, software installation, and parameters. Includes English, German, and Japanese language sections.
	Genmitsu 5.5W-ko puntu konprimituko foku finkoko laser modulua erabiltzailearen eskuliburua Genmitsu 5.5W-ko puntu konprimituko foku finkoko laser moduluaren erabiltzailearen eskuliburua, ezaugarriak, Jinsoku eta Genmitsu CNC makinekin bateragarritasuna, instalazioa, LaserGRBL-rekin softwarearen konfigurazioa eta fokatzeko argibideak zehaztuz.
	Genmitsu Jinsoku LC-40 mahaigaineko laser grabagailua erabiltzailearen eskuliburua Genmitsu Jinsoku LC-40 mahaigaineko laser grabagailuaren erabiltzailearen eskuliburu osoa, segurtasuna, muntaketa, produktuaren parametroak, softwarearen konfigurazioa eta ordenagailurako eta mugikorrerako funtzionamendu gidak biltzen dituena.
	Genmitsu Kiosk Laser Machine Erabiltzailearen Eskuliburua SainSmart-en Genmitsu Kiosko Laser Makinaren erabiltzailearen eskuliburua, instalazioa, funtzionamendua, segurtasuna, softwarea eta mantentze-lanak biltzen dituena.
	Genmitsu 5.5W Laser Module User Manual for CNC 3018-PROVer Comprehensive user manual for the SainSmart Genmitsu 5.5W Laser Fixed Focus Module, detailing installation, setup with LaserGRBL, and usage with CNC 3018-PROVer and other Grbl-based routers.
	Genmitsu Kiosko Laser Makinaren Erabiltzaile Eskuliburua eta Instalazio Gida Genmitsu Kiosko Laser Grabagailu eta Ebakigailuaren erabiltzailearen eskuliburu eta instalazio gida osoa, konfigurazioa, funtzionamendua, softwarea, mantentze-lanak eta arazoak konpontzea barne hartzen dituena.