GTRACING Gaming Chair GT901-NEW Instruction Manual

1. Segurtasun informazio garrantzitsua

Mesedez, irakurri eta ulertu argibide guztiak muntatu eta erabili aurretik. Gorde eskuliburu hau etorkizunean erreferentzia gisa.

• Pisu muga: Do not exceed the maximum recommended weight of 300 lbs (approximately 136 kg). Exceeding this limit may cause damage to the chair and potential injury.
• Muntaia: Ensure all screws and bolts are securely tightened before using the chair. Periodically check and re-tighten all fasteners.
• Egonkortasuna: Avoid standing on the chair or using it as a step stool. Do not lean excessively to one side when reclining to prevent tipping.
• Haurrak: Keep children away from moving parts during assembly. This chair is designed for adult use.
• Lekua: Use the chair on a flat, stable surface. Avoid placing it on uneven ground or near heat sources.

2. Paketearen edukia

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact GTRACING customer support.

• Bizkarraldea
• Seat Base with Armrests and Retractable Footrest
• Izar Oinarria
• Gurpilak (5 pieza)
• Gas Lift Cylinder with Cover
• Mekanismo Plaka
• Lumbar euskarria burukoa
• Buru-euskarri burukoa
• Hardware kita (torlojuak, arandelak, Allen giltza)
• Argibide eskuliburua

3. Muntaketa eta konfigurazio argibideak

Follow these steps carefully to assemble your GTRACING Gaming Chair. It is recommended to have a second person assist with certain steps.

1. urratsa: Gurpilak izar-oinarrira lotu

Sartu bost gurpilak izar-oinarriaren muturreko zuloetan, ondo finkatu arte.

2. urratsa: Gas-igogailuaren zilindroa instalatu

Place the gas lift cylinder into the center hole of the star base. Cover the cylinder with the provided plastic cover.

Step 3: Attach Mechanism Plate to Seat Base

Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism plate faces the front of the seat. Secure with the appropriate screws and tighten firmly.

Step 4: Connect Backrest to Seat Base

Attach the backrest to the seat base using the provided screws. Ensure proper alignment and tighten all screws securely. This step may require assistance.

Step 5: Mount Assembled Seat onto Gas Lift

Carefully place the assembled seat (with backrest and mechanism plate attached) onto the gas lift cylinder. Apply downward pressure to ensure it is seated properly.

Step 6: Attach Lumbar and Headrest Pillows

Secure the lumbar support pillow and headrest pillow to the backrest using their integrated straps. Adjust their positions for optimal comfort.

Figure 3.1: Fully assembled GTRACING Gaming Chair in Dark Grey.

4. Funtzionamendu-argibideak

4.1 Altuera doitzea

To adjust the chair's height, pull the lever located under the right side of the seat upwards. While holding the lever, either stand up to raise the chair or sit down to lower it. Release the lever to lock the height.

4.2 Reclining Backrest

The backrest can recline from 90° to 160°. To recline, pull the lever on the right side of the chair (near the armrest) upwards. Lean back to your desired angle and release the lever to lock the position. To return to an upright position, pull the lever and lean forward.

Figure 4.1: Chair demonstrating the reclining function with the footrest extended.

4.3 Retractable Footrest

To use the footrest, pull it out from underneath the seat. Extend it fully for support. To retract, push it back underneath the seat until it is fully stored.

4.4 Beso-euskarriaren doikuntza

The armrests are 2D adjustable. To adjust the height, press the button located on the side of each armrest and move the armrest up or down. Release the button to lock it in place. The armrests can also pivot horizontally.

Figure 4.2: Illustration of the adjustable 2D armrests.

4.5 Lumbar and Headrest Pillow Adjustment

The lumbar and headrest pillows are adjustable. Slide them up or down along the backrest straps to find the most comfortable position for your neck and lower back support.

5. Mantentzea

Regular maintenance will prolong the life and appearance of your GTRACING Gaming Chair.

• Garbiketa: Wipe the PVC leather with a soft, damp oihal. Orban egoskorretarako, xaboi leun baten soluzioa erabili eta gero zapi garbi batekin garbitu.amp oihal. Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Ikuskapena: Aldian-aldian egiaztatu torloju eta azkoin guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
• Mugitzea: When moving the chair, lift it rather than dragging it to prevent damage to the casters or base.
• Eguzkiaren argia saihestu: Eguzki-argiaren eraginpean denbora luzez egoteak materiala desagertzea edo pitzatzea eragin dezake.

Figure 5.1: Close-up of the chair's durable and easy-to-clean PVC leather material.

6. Arazoak

Ikusi beheko taula arazo ohikoenak eta haien irtenbideak ikusteko.

7. Zehaztapenak

Figure 7.1: Detailed dimensions of the GTRACING Gaming Chair.

8. Bermea eta bezeroarentzako laguntza

GTRACING is committed to providing excellent after-sales service. If you encounter any issues with your gaming chair or have questions regarding its assembly, operation, or maintenance, please do not hesitate to contact our support team.

Our support team is ready to assist and will respond within 24 hours to ensure your satisfaction. Please refer to your purchase documentation for specific warranty details and contact information.

For further assistance, visit the official GTRACING webgunera edo jarri harremanetan produktua erosi zenuen saltzailearekin.