CISA 06A95050FAST Fast Touch Panic Exit Device

Zehaztapenak

• Eredua: IT MICROSWITCH TOUCH
• art. No.: 06A95050
• Konfigurazioa: Microswitch TOUCH
• Parte-zenbakia: 15M0XX

Produktuak erabiltzeko jarraibideak

Arm Bracket Dismantling

To dismantle the arm bracket, use a 2.5mm screwdriver.

Microswitch Assembly on Internal Arm

1. Attach the microswitch to the internal arm using the provided components.
2. Ensure proper alignment and secure with screws.
3. Refer to the diagram for the correct placement of components.

Checking of Operation and Reassembly

1. Check the operation of the microswitch assembly.
2. Use a 2.5mm screwdriver for any adjustments.
3. Reassemble the components following the provided instructions.

INSTALAZIO JARRAIBIDEA

KONFIGURAZIOAK

• Panic exit device
  • 15M0XX
• TOUCH microswitch
  • 06A95050

ARM BRACKET DISMANTLING

MICROSWITCH ASSEMBLY ON INTERNAL ARM

CHECKING OF OPERATION AND REASSEMBLY

BEZEROAREN ARDURADUNA

• Cod. 0892080200000/A
• www.cisa.com

Ohiko galderak

How do I know if the microswitch is functioning correctly?

To check the operation, ensure that the switch responds when the arm is moved.

Can I use a different size screwdriver for assembly?

It is recommended to use a PH2 screwdriver for assembly to prevent damage to the components.

Dokumentuak / Baliabideak

CISA 06A95050FAST Fast Touch Panic Exit Device [pdfInstalazio Gida 15M0XX, 06A95050, 06A95050FAST Fast Touch Panic Exit Device, Fast Touch Panic Exit Device, Fast Touch Panic Exit Device, Fast Touch Panic, Panic Exit Device, Exit Device

Erreferentziak

• Erabiltzailearen eskuliburua