coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Sarearen konfigurazioa

1. Produktua piztu
   • Align the opener to the slot
   • Biratu bateriaren estalkia erlojuaren orratzen kontrako noranzkoan irekitzeko
   • Remove the battery insulation film to power
2. Sakatu RESET botoia 3 segundoz eta askatu, LED gorria keinuka hasiko da sarearen konfigurazioa adierazteko.

Instalazio-argibideak

Instalazio-posizioa
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Mesedez, irakurri arretaz eskuliburua eta erabili produktua behar bezala
Eskerrik asko erosketagatik.asing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Produktuaren deskribapena

Aholkuak:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Produktuaren Parametroak

• Product Name Zigbee Ambient Light Sensor
• Haririk gabeko protokoloa Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm