DeepCool AK400 CPU Cooler With A Status Display
Zehaztapenak
- Eredua: DeepCool AK400 Digital CPU Cooler
- Socket Compatibility
- Intel: LGA 1150/1151/1155/1156/1200/1700
- AMD: AM4/AM5
- Cooling Capacity (TDP): Gehienez 220W
- Bero-hodiak: 4 x 6mm direct-touch copper heat pipes
- Fan:
- Tamaina: 120 mm x 120 mm x 25 mm
- Mota: Fluid Dynamic Bearing (FDB)
- Abiadura500–1850 bira/min ±% 10
- Aire-fluxua: Up to 68.99 CFM
- Zarata Maila: ≤28 dB(A)
- Konektorea: 4 pin PWM
- Balorazio baloratuatage: 12V DC
- Energia-kontsumoa: 1.44 W
- LED Argiztapena: Addressable RGB
- Konektoreak: 3-pin (+5V-D-G) and 9-pin USB 2.0
- Neurriak:
- Orokorrean: 126 mm (L) x 97 mm (W) x 156 mm (H)
- Beroa: 120 mm (L) x 60 mm (W) x 152 mm (H)
- Pisua: 695 g inguru
Muntatzeko eta Instalatzeko Argibideak
Beharrezko tresnak
- Phillips bihurkin
- Pasta termikoa (aurrez aplikatu ez bada)
- Cleaning cloth or isopropyl alcohol (for CPU surface prep)
Step 1: Prepare the Motherboard
- Power off your PC and unplug all cables.
- Remove the existing CPU cooler if applicable.
- Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.
Step 2: Install the Backplate
- Place the provided motherboard backplate on the rear side of the motherboard.
- Align the holes of the backplate with the CPU socket mounting holes.
Step 3: Attach Standoffs
- Insert the standoffs through the motherboard aligned with the backplate.
- Tighten the standoffs gently; they will hold the cooler firmly in place.
Step 4: Apply Thermal Paste
- Aplikatu pasta termiko kantitate txiki bat ilar baten tamainako CPUaren erdian.
- If your AK400 cooler comes with pre-applied thermal paste, skip this step.
Step 5: Mount the Cooler
- Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
- Carefully place the cooler onto the CPU and press gently.
- Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.
Step 6: Attach the Fan
- Attach the fan to the heatsink using the included clips or screws.
- Ensure the airflow direction is correct (usually indicated by arrows on the fan).
Step 7: Connect the Fan & Display
- Plug the fan power cable into the CPU_FAN header on the motherboard.
- Connect the status display cable to the appropriate motherboard or power header as specified in the manual.
8. urratsa: Azken egiaztapenak
- Double-check that all screws are tight and the cooler is secure.
- Ensure cables are connected and not obstructing the fan.
- Close the PC case and reconnect the power.
Step 9: Power On & Monitor
- Turn on your PC and check the status display for proper operation.
- Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.
Aholkuak
- Handle the cooler carefully; the display panel can be fragile.
- Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
- Make sure airflow is not blocked by other components.
- After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, webgunea.www.deepcool.com/downloadpage/
- Sistema eragilearen bertsioaren eskakizunak: Windows 10/Windows 11
Ohiko galderak
How do I install the AK400 Digital?
The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.
Pertsonalizatu al dezaket RGB argiztapena?
Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.
Dokumentuak / Baliabideak
 |
DeepCool AK400 CPU Cooler With A Status Display [pdfErabiltzailearen eskuliburua AK400 CPU Cooler With A Status Display, AK400, CPU Cooler With A Status Display, Status Display, Display |