Effon M2 Barcode Reader User Guide

Effon M2 Barcode Reader

Zehaztapenak

Konfiguratu eta Erabili

1. Piztu: Press either side button to turn on the device.
2. Itzali: By default it shuts down after 5 minutes of sleep. To change shutdown behavior, scan the sleep-time setup barcode (or scan the Lo egin orain barcode).
3. Initialize/reset: Eskaneatu Hasieratu ezarpenak barcode to reset to initial settings.
4. Update version display: Eskaneatu Bistaratu bertsioaren informazioa barcode to show version details.
5. Set output customization (optional): Use the relevant setup barcodes for prefix/suffix, end character, HID character case, and hide front/rear characters.
6. Configure Bluetooth (optional): After connecting Bluetooth, scan Aldatu Bluetooth izena, then scan the desired Bluetooth name barcode; after canceling Bluetooth pairing, search again. To switch modes, scan the required Bluetooth mode barcode.
7. Mounting (optional): Adhere the metal plate to your phone/case, align the M2 slots to the plate, and slide upward until it clicks; to remove, hold the sliding button and slide the scanner downward.

Piztu eta itzali

Aktibatu:
Press either side button to turn on the device.

Itzali:
By default, it will shut down after 5minutesofsleep.You can scan the setting code to turn off, or set the required sleep time.

Initialization settings &Versioninformation
To reset the scanner to its initial settings, scanthe“InitializeSettings” barcode below. Scanning the “DisplayVersionInformation” barcode will show the scanner’s versiondetails.

Prefix and suffix setting
Scan the “Prefix setting” or “Suffix setting” barcode, then scan the ADCII code of the desired prefix or suffix character.

Transmisio-abiaduraren ezarpena

Lo egiteko denboraren ezarpena

Storage mode setting

Set to hide front or rear characters
Scan the “Hide front character” or “Hide rear character” setup code first, then scan the barcode with the desired number of characters.

HID output character casesetting

HID teklatuaren hizkuntza ezarpena

Aldatu Bluetooth izena

• Step1: After connecting Bluetooth, scan the “Change Bluetooth Name” barcode.
• Step2: Scan the barcode for the Bluetooth name you wish to set, such as “Scanner123”. Finally, after canceling the Bluetooth pairing, perform a new Search to find the new Bluetooth name

Bluetooth moduaren ezarpena
After scanning the required Bluetooth mode barcode, thescanner will switch to the corresponding mode.

Amaitu karaktere ezarpena

Bolumena eta motorraren ezarpena

Toggle Bluetooth HIDkeyboardiniOS

Bistaratu bateriaren maila

Muntaketa

1. Attach: Adhere the metal plate with fixing hooks to the back of your phone or phone case.
2. Align: Position the M2 scanner, aligning its slots with both ends of the metal plate.
3. Slide & Lock: Slide the M2 upward until you hear a “click,” indicating it is securely locked in place.

Desmuntatzea

1. Unlock: Push the sliding button at the bottom of the M2 to the left and hold it in position.
2. Slide Off: While holding the button, slide the M2 downward to remove it from the plate.

Aholkua:
The metal plate on your phone allows for quick and easy Reinstallation whenever needed.

Neurriak 
90.3×62.4X14.O mm (LXWXH)

Pisua:
49.5 gramo

FCC Adierazpena

Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua honako bi baldintza hauen menpe dago:

1. Baliteke gailu honek ez du interferentzia kaltegarririk eragin, eta
2. gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne. Betearen arduradunak espresuki onartzen ez dituen aldaketak edo aldaketek ekipamendua erabiltzeko erabiltzailearen eskumena baliogabetu dezakete.

OHARRA:
Ekipo hau probatu da eta B Klaseko gailu digital baten mugak betetzen dituela ikusi da, FCC Arauetako 15. zatiaren arabera. Muga hauek etxebizitza-instalazio batean interferentzia kaltegarrien aurka arrazoizko babesa emateko diseinatuta daude. Ekipo honek irrati-maiztasun-energia sortzen, erabiltzen eta igor dezake eta, argibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati-komunikazioetan. Dena den, ez dago bermatzen instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek irrati- edo telebista-harreran interferentzia kaltegarriak eragiten baditu, eta hori ekipoa itzali eta piztuz jakin daiteke, erabiltzaileari gomendatzen zaio interferentziak zuzentzen saiatzea, neurri hauetako bat edo gehiago erabiliz:

• Berbideratu edo lekuz aldatu antena hartzailea.
• Handitu ekipoaren eta hargailuaren arteko bereizketa.
• Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
• Kontsultatu banatzaileari edo irrati/telebistako teknikari esperientziadun bati laguntza lortzeko.

Gailua RF esposizioaren baldintza orokorrak betetzen dituela ebaluatu da. Gailua esposizio-baldintzetan erabil daiteke mugarik gabe.

Arazoak konpontzea

• Scanner output not as expected (prefix/suffix, hidden characters, end character): Re-check the relevant setup codes and use the corresponding cancel procedure (e.g., scan the Prefix/Suffix setting barcode again to cancel, or scan the Utzi amaierako karakterea barcode).
• Need to restore default settings: Eskaneatu Hasieratu ezarpenak barcode to reset the scanner to its initial settings.
• Bluetooth device name change didn’t take effect: The manual states that after initialization the Bluetooth name reverts to default. Also, after setting a new name, cancel Bluetooth pairing and perform a new search to find the updated Bluetooth name.
• Need to switch Bluetooth behavior: Scan the desired Bluetooth Mode Setting barcode; the scanner will switch to the corresponding mode.
• Power/sleep timing confusion: If the device is shutting down sooner than desired, scan the appropriate Lo egiteko ordua ezartzea barcode (e.g., 10 minutes, 30 minutes, or Inoiz ez lo egin.).