Zehaztapenak

• Product: Eliot Original Rotary Controller
• Bertsioa: 07 / 2025
• Bermea: 5 urte
• Erabilera aurreikusita: Bulego lehorrak

Tresnak

Zatiak

Muntatzeko eskuliburua

1. urratsa | bateria instalatu
Open the two covers of the Rotarycontroller and follow the instructions to install two AAA batteries. (1)
Then reinstall the two covers of the Rotarycontroller.

2. urratsa | Konektatu
Konektatu haririk gabeko hargailua Eliot Original mahaiaren kontrol-kutxara.

3. urratsa | Muntaketa
Muntatu hargailua mahaiaren azpian, erantsitako torlojua erabiliz. Lotu kablea kable-kliparekin.

Erabili

• Altxatu mahaia.
  Press the Rotary controller and turn it clockwise. The desk will rise.
  Release to stop at the desired height.
• Down lower the desk
  Press the Rotary controller and turn it counterclockwise. The desk will lower. Release to stop at the desired height.

Ezarri 2 memoria-posizio

• Move desk to the desired height.
• Press and hold the controller for 5 seconds.
• The Rotarycontroller vibrates once to prompt to set the current position as the „memory position 1“.
• To set memory position 2 move desk to desired height.
• Double-click and press the controller for 5 seconds.
• The remote control vibrates twice to prompt to set the current position as the „memory position 2“.

Erabili memoria funtzioa

• To reach memory position 1:
• Double-click and press the controller while rotating clockwise, and the desk will stop after reaching memory position 1.
• To reach memory position 2:
• Double-click and press the controller while rotating counterclockwise.
• The desk will stop after running to memory position 2.
  Oharra: During operation, before the actuator moves to the memory position, any action such as turning left, turning right or pressing the controller will stop the current operation.

Kontuz/Segurtasun Jarraibideak

1. Make sure to have followed all caution/safety instructions from the Eliot Original height-adjustable desk original user & assembly instructions.
2. When using the Rotarycontroller, the user must pay full attention and make sure that no person can be injured or object damaged in the process.
3. Produktua bistako kaltetuta badago, ezin da instalatu edo erabili.
4. Osagai elektriko guztiak likidoetatik urrun mantendu.
5. Ez ireki osagai elektrikorik. Deskarga elektrikoaren arriskua dago.
6. Telefonoaren konfigurazio estandarrean egindako edozein aldaketek erantzukizun edo berme erreklamazio guztiak baliogabetuko dituzte.
   Every person responsible for this desk, at instal-lation or operating of the desk, in daily use or in service and repair work, must have access to these instructions and read them carefully. Keep these instructions close to your height-adjustable desk.

Bermea eta erantzukizuna

Bermea: 5 urte
This Rotary controller is designed for use in dry office areas only.
Beste edozein erabilera erabiltzailearen ardurapean dago.
Fabrikatzaileak ez du inola ere onartzen kontrolagailuaren erabilera desegokitik edo manipulaziotik sortutako kalteengatiko berme-erreklamaziorik edo erantzukizun-erreklamaziorik.

Ohiko galderak

For additional support please visit: https://smartfurniture.zendesk.com

Smartfurniture GmbH | Bodenseestr. 228 | 81243 München www.eliotfurniture.com | support@smartfurniture.de

Batteries should not be disposed with household waste. They should be segregated and brought to an appropriate collection point for recycling. Smartfurniture GmbH will also accept the batteries for recycling.
For more informations contact your local authorities.