ESBE CRK210 Controller User Guide

ESBE CRK210 Controller

ESBE serie CRK210 kontrolagailuekin eragingailu konbinatuak dira. CRK210 sortak etengabeko fluxuaren tenperatura kontrola eskaintzen du berokuntza eta hozte funtzio konbinatua duten gailuetarako. CRK210 seriea VRx serieko balbulekin erabiltzeko pentsatuta dago.

Funtzionamendua

• The CRK210 is a constant temperature controller intended for applications where a constant flow temperature is desired. The controller is integrated with an actuator and is designed to be used with rotating mixing valves series VRx.
• The Series CRK210 consists of two main components: an actuator and a flow temperature sensor. The primary function of the controller is to maintain a constant set temperature at the sensor location. The series includes a T/T2 (main temperature to alternative temperature) setting, which also controls the opening direction of the actuator. This feature is intended for devices with combined heating and cooling functions set by relay. Additional equipment, such as a clock, may be needed to release the relay if the heating/cooling unit lacks an available control signal. Releasing the relay changes the actuator’s working direction to match the source unit’s mode (heating or cooling). Settings are adjusted via a joystick and displayed on a screen.

Introduction of ESBE Self-Adaptive System

The ESBE Self-Adaptive System manages PI factors (Proportional gain and Integral response) by learning system behaviors and addressing issues previously managed by installers. This system ensures smooth controller operation, eliminates issues related to delays or response times, and delivers high control standards and comfort. This makes the CRK210 Series suitable for any system setup or environment.

INSTALAZIOA

• Elikadura 230 V-ko AC egokigailuaren bidez (transformadorearekin, kablearekin eta entxufearekin).
• Emari-tenperatura-sentsorea 1,5 m-ko kablearekin dator (kable luzeagoa osagarri gisa eskuragarri). Sentsoreak arretaz isolatu behar du giro-tenperaturatik.
• CRK210 kontrolagailu seriearen eta ESBE serie VRG eta VRH seriearen arteko interfaze bereziari esker, unitateak osotasunean egonkortasun eta zehaztasun paregabea du erregulatzerakoan.

Aukerako Ekipamendua

• Art. No. 16200700: ARA801 Auxiliary switch kit
• Art. No. 17053100: CRA911 Flow temperature sensor, 5m cable
• Art. No. 17056200: CRA915 UK plug

Nahaste-balbula egokiak

• VRG130 seriea
• VRG230 seriea
• VRG330 seriea
• VRH130 seriea
• 3MG seriea
• 3G seriea
• Series 3F DN50

Egokitzailea Kitak
Required adaptor kits for easy fitting onto an ESBE rotary mixing valve series VRx are supplied with each controller. Adaptor kits can also be ordered separately.

• Art. No. 16000500: ESBE valve series VRG, VRH, G, MG, F
• Art. No. 16000600: Meibes
• Art. No. 16000700: Watts
• Art. No. 16000800: Honeywell Corona
• Art. No. 16000900: Lovato
• Art. No. 16001000: PAW
• Art. No. 16001100: Wita Minimix, Maximix

KONTROLATZAILEAREN

Technical Data Details

• Ambient temperature: max. +55°C, min. -5°C
• Sentsore mota: NTC
• Temperature range: Flow temperature sensor +5 to +95°C
• Enclosure rating, Actuator unit: IP41
• Babes klasea: II
• Power supply, Actuator unit: 230 ± 10% V AC, 50 Hz
• Power consumption (230 V AC): 10 VA
• Torque (Actuator): 6 Nm
• Running time at max. speed (Actuator): 30s
• ErP Temperature control class: N/A
• Energy efficiency contribution: N/A

Complies with LVD 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU

INSTALAZIOA EXAMPLE

Berokuntza-zirkuitura doan fluxu-tenperatura konstantea
CRK210-k ezarritako fluxu-tenperatura kontrolatzen eta ziurtatzen du. Kontrolagailua gailura konektatuta dago beroketa eta hozte funtzio konbinatuarekin. Konexioa errele bidez egiten da, askatzen denean CRK210-ren irekiera noranzkoa aldatuko duena. Ezaugarri honi esker, CRK210-k berokuntza/hozte gailuaren berokuntza- edo hozte-moduaren arteko lan-printzipioa doi dezake.

Erakusten diren aplikazioak adibidezampProduktuaren erabilera gutxiago! Produktua edozein aplikaziotan erabili aurretik, eskualdeko eta estatuko araudia egiaztatu behar da.