FlySpark F4 V1 Stack Flight Controller
Zehaztapenak
- Produktuaren izena:
FlySpark F4 V1 BLS 60A pila - AI Ezaugarriak:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Softwarearen laguntza
Betaflight, INAV, Ardupilot, EMU-hegaldia, SkyBrush - ESC Communication:
BLHeli_S Bluetooth eta USB-C - Konektibitatea:
3-6S LiPo - Dimentsioa:
47.8 mm (L) x 47.5 mm (W) x 18.3 mm (H) - Muntaketa:
30.5 x 30.5 mm 4 mm-ko zuloaren tamainarekin - Pisua:
34 g
Produktuak erabiltzeko jarraibideak
FlySpark F4 V1 Hegaldi Kontrolagailua
Diseinua:
Refer to the user manual for the layout of the flight controller.
Konexio periferikoa:
Connect peripherals as per the provided diagram.
Aplikazioaren eta FC konfigurazioa:
Use the recommended apps and follow the configuration instructions.
FC Firmware Eguneratzea:
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-IN-1 ESC
Diseinua:
Check the layout guide in the manual for proper installation.
Motor eta elikatze kablearekin konexioa:
Connect motors and power cables securely.
ESC konfigurazioa:
Use the FlySpark app for ESC configuration settings.
ESC Firmwarearen Eguneratzea:
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A pila
Zehaztapenak amaituview
Paketea
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF ESR baxuko kondentsadorea x 1
- M3 Nylon Intxaur x 4
- SH 1.0 mm 25 mm-ko luzera 8 pin kablea (FC-ESC konexiorako) x 1 SH 1.0 mm 75 mm-ko luzera 6 pin kablea* x 1
- M3 * 30 mm barne-hexagonodun torlojuak x 4
- DJI 6 pin kablea (80 mm) x 1
- XT60 korronte kablea (100 mm) x 1
FC konexio diagrama
FC eta ESC konexioen gida
1. metodoa:
- Using 8.Pin JST Cable
2. metodoa:
Soldadura zuzena
- Soldatu 8 hari mutur bakoitzean dauden 8 pad-etara, beheko pad-en definizioak jarraituz.
Hegaldi-kontrolagailuaren zehaztapenak
- Erabili 6 pin kablea O3 Air Unitatearekin dator
- Erabili FlySpark F6 V4 BLS 1A pilarekin datorren 60 pineko kablea.
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Oharra:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Motor eta elikatze kablearekin konexioa
ESC Specs FlySpark F4 V1 BLS 60A Stack
ESC Firmware eguneratzea
8 biteko 50A-ko ESC honek BLHeliS firmwarea aurrez kargatuta dator, baina Bluejay firmwarera ere flasheatu daiteke, RPM iragazketa eta Dshot bidirekzionalaren euskarria eskainiz. Jarraitu urrats hauek firmwarea eguneratzeko:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Konektatu ordenagailura:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
OHARRAK:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
Ohiko galderak
Nola eguneratzen dut ESC firmwarea?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Dokumentuak / Baliabideak
 |
FlySpark F4 V1 Stack Flight Controller [pdfErabiltzailearen eskuliburua F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |