HYPERKIN Competitor Wired Controller User Manual

HYPERKIN Competitor Wired Controller

Eskerrik asko erosketagatik.asing the Hyperkin The Competitor for Xbox Series X|S, Xbox One, and Windows 10/11 PC – Wired Controller. For your safety and the safety of others, please carefully read this guide before using this product.

1. Plug the provided Type-C cable into the Type-C port located on the TOP of the Hyperkin Xenon.
2. Plug the other end of the cable into an available USB port on your Xbox Series X|S, Xbox One, PC or Steam OS.
3. The controller will vibrate.
4. Click the Nexus button.
5. The ring light will illuminate.

Zure kontrolagailua erabiltzeko prest dago.

WAKING UP YOUR XBOX CONSOLE USING THE COMPETITOR

If The Competitor is plugged into an Xbox console, you may turn on the console by clicking the Nexus button on The Competitor. After doing so, the console will turn on and the controller Nexus button will illuminate (this may take a few seconds).

Zure kontrolagailua erabiltzeko prest dago.

PROGRAMMABLE BACK BUTTONS (MAPPING)

To map a button to a back button, hold the Mode Button (marked “M”) on the back of the controller, and your desired back button (M1 or M2) at the same time. The Competitor will vibrate, and the ring light around the Nexus will begin to flash. Release the Mode Button and back button. The Competitor is now in “mapping mode”. Next, click the button you would like mapped to your desired back button. The Competitor will vibrate again, indicating that you have exited “mapping mode” and the selected button has been mapped to your desired back button.

PROGRAMMABLE BACK BUTTONS (UN-MAPPING)

To un-map a button from a back button, hold the Mode Button (marked “M”) and your desired back button. The Competitor will vibrate, and the ring light will begin to flash. Release the Mode Button and back button. The Competitor is now in “mapping mode”. Next, click the same back button. The Competitor will vibrate again, indicating that you have exited “mapping mode” and a button is no longer mapped to that back button.

BACK BUTTON LOCKS

To disable back buttons, slide the switches on the back of The Competitor inwards towards the “locked” indicator to lock the back buttons. Slide outwards to unlock.

REMOVEABLE STICK CAPS
Grip and remove the stick caps in an upward motion. To set new stick caps onto the sticks, align the smaller teeth on the stick caps with the notches on the stick. Press down on the stick caps until they click into place.

AURIKULARRA
Connect your headset audio jack into the bottom of The Competitor.

MICROFONOA MUTE BOTOIA
Double-tap the Mute Button (microphone symbol) on the front of The Competitor to mute the microphone on a connected headset. An orange glow indicates that your microphone is muted.

FCCren oharra

Ekipo hau probatu egin da eta B Klaseko gailu digitalaren mugak betetzen dituela ikusi da, FCC Arauetako 15. zatiaren arabera. Muga hauek egoitza-instalazio batean diseinatzen dira. Ekipo honek irrati-maiztasun-energia sortzen, erabiltzen eta igor dezake eta, argibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati-komunikazioetan. Dena den, ez dago bermatzen instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek irrati- edo telebista-harreran interferentzia kaltegarriak eragiten baditu, eta hori ekipoa itzali eta piztuz jakin daiteke, erabiltzaileari gomendatzen zaio interferentziak zuzentzen saiatzea, neurri hauetako bat edo gehiago erabiliz:

• Berbideratu edo lekuz aldatu antena hartzailea.
• Handitu ekipoaren eta hargailuaren arteko bereizketa.
• Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
• Kontsultatu saltzaileari edo esperientziadun irrati telebistako teknikariari edo posta elektronikoz Support@Hyperkin.com laguntza lortzeko. Unitate honekin blindatutako kableak erabili behar dira B klaseko FCC mugak betetzen direla ziurtatzeko.

Unitate honetan egindako aldaketak edo aldaketek berariaz onartzen ez duten alderdiak betetzeaz arduratzen den alderdiak erabiltzailearen eskumena baliogabetu dezake ekipo hau erabiltzeko.

EBko Zuzentarauaren Betetze Adierazpena

Hyperkin Inc., located at 1939 West Mission Blvd, Pomona, CA 91766, declares under our sole responsibility that the product, Hyperkin Xenon Wired Controller, is in compliance with the essential requirements and other relevant provisions of Low Voltage Zuzentaraua (LVD) 2014/35/EB, RoHS Zuzentaraua 2011/65/EB, eta CE marka darama.

Adostasun Deklarazio osoa posta elektronikoz eska daiteke:

• Posta elektronikoa: compliance@hyperkin.com
• Enpresaren izena: Hyperkin Inc.
• Helbidea: 1939 West Mission Blvd, Pomona, CA 91766

© 2026 Hyperkin Inc. Hyperkin® is a registered trademark of Hyperkin Inc. All rights reserved. All other trademarks are the property of their respective owners.