Keeson RC302F Remote Control User Manual

Keeson RC302F Remote Control

Zehaztapenak

• Produktuaren izena: URRUNEKO KONTROLA
• Eredua: RC302F
• Sarrera: 3 x Battery AAA 1.5V
• Fabrikatzailea: Keeson Technology Corporation Limited
• Manufacturing Country: Txina

Erabilera-argibideak

Oinarrizko doikuntzak

• Burua gora: Press and hold the ‘HEAD UP’ button. The head actuator will move out. Release to stop.
• Burua behera: Press and hold the ‘HEAD DOWN’ button. The head actuator will move in. Release to stop.
• Oina gora: Press and hold the ‘FOOT UP’ button. The foot actuator will move out. Release to stop.
• Oina behera: Press and hold the ‘FOOT DOWN’ button. The foot actuator will move in. Release to stop.
• Lumbar Up: Press and hold the ‘LUMBAR UP’ button. The lumbar actuator will move out. Release to stop.
• Lumbar Down: Press and hold the ‘LUMBAR DOWN’ button. The lumbar actuator will move in. Release to stop.
• Tilt Up: Press and hold the ‘TILT UP’ button. The head tilt actuator will move out. Release to stop.
• Behera makurtu: Press and hold the ‘TILT DOWN’ button. The head tilt actuator will move in. Release to stop.

Funtzio bereziak

• UBB (Underbed Light): Click the ‘UBB’ button to turn the underbed light on or off.
• Massage Head +: Click the ‘MASSAGE HEAD +’ button to cycle through head massage intensity levels (0-1-2-3).
• Massage Head -: Click the ‘MASSAGE HEAD -‘ button to gradually decrease head massage intensity (3 levels).
• Massage Foot +: Click the ‘MASSAGE FOOT +’ button to cycle through foot massage intensity levels (0-1-2-3).
• Massage Foot -: Click the ‘MASSAGE FOOT -‘ button to gradually decrease foot massage intensity (3 levels).
• Masajearen tenporizadorea: If massage motors are active, click this button to switch the massage time. Setting the timer to ‘0’ will turn off the massage. This button is inactive if massage motors are off.
• Etxebizitza: Click the ‘FLAT’ button to return the bed to a flat position. The process will stop if any other button is clicked during movement.
• Zero G (ZG): Click the ‘ZG’ button to move the bed to the Zero Gravity position. The movement will stop if any other button is clicked during the process.
• Memory Position: Click the ‘MEMORY POSITION’ button to move the bed actuators to a pre-set memory position.

Amaituview

1. Burua gora
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Burua behera
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, and stops when released.
3. Oina gora
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Oina behera
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released.
5. Lumbar up
   Press and hold the LUMBAR UP button of the remote. The lumbar actuator moves out and stops when released.
6. Lumbar down
   Press and hold the LUMBAR DOWN button of the remote, the lumbar actuator moves in, and stops when released.
7. Okertu
   Press and hold the TILT UP button of the remote, the head tilt actuator moves out, and stops when released.
8. Okertu behera
   Press and hold the TILT DOWN button of the remote, the head tilt actuator moves in, and stops when released.
9. UBB
   Click the Underbed light button to open or shut the light under the bed.
10. Massage head +
    Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
11. Massage foot +
    Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
12. Massage head –
    Clicking will cause the intensity of the head massage to gradually decrease, with a total of 3 levels.；
13. Massage foot –
    Clicking will cause the foot massage intensity to cycle and decrease gradually, with a total of 3 levels.；
14. Masaje tenporizadorea
    If the massage motors do not work, the button is invalid. If the massage motors work, click the button to switch the massage time. When the massage time switches to 0, turn off the massage.
15. Laua
    Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
16. ZG botoia
    Click the ZG button, the actuator moves to the ZG position, and stops when any button is clicked during the movement.
17. Memoriaren posizioa
    Click the memory position to move the actuator to the memory position.

FCC ADIERAZPENA

FCC abisua
Ekipo hau probatu egin da eta B Klaseko gailu digital baten mugak betetzen dituela ikusi da, FCC Arauetako 15. zatiaren arabera. Muga hauek etxebizitza-instalazio batean interferentzia kaltegarrien aurka arrazoizko babesa emateko diseinatuta daude. Ekipo honek irrati-maiztasun-energia sortzen, erabiltzen eta igor dezake eta, argibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati-komunikazioetan. Dena den, ez dago bermatzen instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek irrati- edo telebista-harreran interferentzia kaltegarriak eragiten baditu, eta hori ekipoa itzali eta piztuz jakin daiteke, erabiltzaileari gomendatzen zaio interferentziak zuzentzen saiatzea, neurri hauetako bat edo gehiago erabiliz:

• Berbideratu edo lekuz aldatu antena hartzailea.
• Handitu ekipoaren eta hargailuaren arteko bereizketa.
• Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
• Kontsultatu banatzaileari edo irrati/telebistako teknikari esperientziadun bati laguntza lortzeko.

Betearen arduradunak espresuki onartzen ez dituen aldaketak edo aldaketak ekipamendua erabiltzeko erabiltzailearen eskumena baliogabetu dezake.
Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua honako bi baldintza hauen menpe dago:

1. Baliteke gailu honek ez du interferentzia kaltegarririk eragin, eta
2. Gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.

RF Esposizioari buruzko informazioa

• Gailua RF esposizioaren baldintza orokorrak betetzen dituela ebaluatu da. Gailua esposizio-baldintzetan erabil daiteke mugarik gabe.

ISED RSS abisua
Gailu honek Innovation, Science and Economic Development Canada lizentziarik gabeko RSS estandarrak betetzen ditu. Funtzionamendua honako bi baldintza hauen menpe dago:

1. This devicemay not cause interference, and
2. Gailu honek edozein interferentzia onartu behar du, gailuaren funtzionamendua eragin dezakeen interferentziak barne.

Arazoak konpontzea

• Urrunekoek ez dute erantzuten: Ensure batteries are correctly inserted and not depleted. Replace with new AAA 1.5V batteries if necessary.
• Bed not moving: Check if the remote’s batteries are working. Ensure no obstructions are preventing bed movement. If the bed is stuck, try pressing the ‘FLAT’ button.
• Massage not working: Ensure the massage motors are turned on. The ‘Massage Timer’ button will be invalid if the motors are off.
• RF Esposizioa: Gailuak RF esposizio-baldintza orokorrak betetzen dituela ebaluatu da eta esposizio-baldintza eramangarrietan erabil daiteke mugarik gabe.

Ohiko galderak

• Q: What type of batteries does the remote use?
  • A: The RC302F remote control uses 3 x AAA 1.5V batteries.
• Q: How do I stop the bed from moving to a preset position (eg, Flat or Zero G)?
  • A: You can stop the bed’s movement to a preset position by clicking any other button on the remote during the process.
• G: Doitu al dezaket masajearen intentsitatea?
  • A: Yes, you can increase head/foot massage intensity using ‘MASSAGE HEAD +’ / ‘MASSAGE FOOT +’ buttons and decrease it using ‘MASSAGE HEAD -‘ / ‘MASSAGE FOOT -‘ buttons. There are 3 levels of intensity.
• Q: What does the UBB button do?
  • A: The UBB button controls the underbed light, turning it on or off with a click.
• Q: What should I do if the remote isn’t working after changing batteries?
  • A: Ensure the new batteries are inserted with the correct polarity. If the issue persists, contact Keeson Technology Corporation Limited customer support.