MC25 Objektuak Detektatzeko Sentsorea

1. Abstract

The Montage Object Detection Sensor is a stand-alone Time of Flight Volumetric Sensor with
advanced hardware and firmware features. It is designed around an advanced Time of Flight
imager chip. The system detects the presence or absence of cargo inside a container or a trailer
and communicates data collected to a gateway over Bluetooth. It is mounted on the inside
ceiling of a trailer and powered from an external 12VDC power source. By looking down from
the ceiling, it senses the presence of cargo on the floor of the trailer.

Zehaztapenak  

1. Mekanikoa 
1.1  Dimensions  Sensor Blokea  Rectangular 107 x 52 x 25.4 mm
1.2  Neurriak Potentzia Iturria  Cable with 12VDC on a customized 4 pin connector Connector. Power can be from a  battery and joined with other units within the trailer 
1.3  Instalazioaren kokapena  Sensor (shown by red arrow) will be attached to the EB and look down unobstructed to the floor.  

The sensor will be mounted to the ceiling, centered between the walls. The mount will be no more than 4” below the ceiling, connected by cables down the center of the ceiling to the Energous Bridge (EB, shown by yellow oval). 

zubia

1.4  Etxebizitza  Materiala  Product: Molded Valox FR Resin V3900WX Polycarbonate + PBT 
1.5  Etxebizitza Kolorea  Zuria 

 

1.6  Muntaketa  x4 Internal Rivets or sheet metal screws. Installation from inside.  

Needs to be with 2” of roof center and have < 2-degree tilt relative  to the floor. Tilt and compensation for being off center can be  

adjusted with angle Alignment Plates underneath the housing  

muntatzean. 

1.7  IP balorazioa  IP67 rated water resistant housing to ensure device can withstand fine dust and  protection from condensing humidity within the reefer. 

 

 
1.8  Funtzionamendu-tenperatura  -20˚C to +60˚C (-4˚F to 140˚F) 
1.9  Sukoitasunaren balorazioa  UL 94 V-0 
2. Diseinua 
2.1  Bluetooth ® Antenna  Internal antenna positioned inside the Sensor enclosure for good  reception. 
2.2  Trailer Ambient  

Tenperatura 

Temperature sensor to measure the trailer internal ambient  conditions is placed near the connector for thermal conduction. 
2.3  Shock & Vibration Rating  U.S. Military Standards 202G and 810F, SAE  

J1455 

2.4  EMC/EMI  SAE J1113; FCC-Part 15B Industry  

Kanada 

3. Laser and Optics 
3.1  Irudigilea  FPA = 8×8 pixel (VCSEL emission)  

Resolution of up to 64 points 

3.2  Eragiketa-eremua  9' 
3.3  Funtzionamendu Baldintza  Barruko erabilerarako soilik 
4. Elikatze-iturria 
4.1  Source-1  12VDC power source power range (up to 24Vnom, 32V limit),  resettable fuses, watchdog timer.
4.2  Bateria Edukiera  Onboard battery 800mAh 
5. Elektronika 
5.1  CPU nagusia  NORDIC nRF52840 with OTA DFU Capabilities 
5.2  Bluetooth ® SoC  NORDIC nRF52840 with OTA DFU Capabilities 
5.3  Bluetooth ® Radio Front  End Ampbiziagoa  +18 dBm 

 

6. Konektibitatea 
Bluetooth® 
6.1  Haririk gabeko konexioa  Pairs nearby Bluetooth Gateway through a defined  

communication structure in both data through BLE advertisement  and connection profiles 

6.2  Bertsioa  Bluetooth Low Energy BLE 5.0 
6.3  Transmisio Potentzia  -20dBm-tik +8dBm  

Selectable through Firmware 

7. Ziurtagiria 
7.1  FCC  Product shall comply with all applicable wireless standards/rules 
7.2  UL / CE  Bai 
7.3  RoHS  Product shall be RoHS compliant and not have any known-harmful materials or substances on any external surface 
7.4  Begietako Segurtasuna  Klase-1 

3 Produktuen irudiak 

4 Instalazioa Adibample  

fasea

FCC Araudia  

Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua honako bi baldintza hauen menpe dago:  

(1) Gailu honek ez du interferentzia kaltegarririk eragin, eta  

(2) Gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.  

Ekipo hau probatu da eta B Klaseko gailu digital baten mugak betetzen dituela ikusi da, FCC Arauetako 15. zatiaren arabera. Muga hauek etxebizitza-instalazio batean interferentzia kaltegarrien aurka arrazoizko babesa emateko diseinatuta daude. Ekipo honek irrati-maiztasun-energia sortzen, erabiltzen eta igor dezake eta, argibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati-komunikazioetan. Dena den, ez dago bermatzen instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek irrati- edo telebista-harreran interferentzia kaltegarriak eragiten baditu, eta hori ekipoa itzali eta piztuz jakin daiteke, erabiltzaileari gomendatzen zaio interferentziak zuzentzen saiatzea, neurri hauetako bat edo gehiago erabiliz:  

Berbideratu edo lekuz aldatu antena hartzailea.  

Handitu ekipoaren eta hargailuaren arteko bereizketa. 

Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.  

Kontsultatu banatzaileari edo irrati/telebistako teknikari esperientziadun bati laguntza lortzeko.  

Fabrikatzaileak berariaz onartzen ez dituen aldaketak edo aldaketek ekipamendua erabiltzeko erabiltzailearen baimena baliogabetu dezakete. 

 V 1.4 [3-14-2025]   

FCC RF erradiazioaren esposizioaren adierazpena  

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable  to only Mobile Configurations. The antennas used for the transmitter must be installed to  provide a separation distance of at least 20cm from all persons and must not be co-located or  operating in conjunction with any other antenna or transmitter. 

5tik 5 

Dokumentuak / Baliabideak

altage MC25 Object Detection Sensor [pdf] Erabiltzailearen eskuliburua
2BLQ4-MC25, 2BLQ4MC25, mc25, MC25 Object Detection Sensor, MC25, Object Detection Sensor, Detection Sensor, Sensor

Erreferentziak

Utzi iruzkin bat

Zure helbide elektronikoa ez da argitaratuko. Beharrezko eremuak markatuta daude *