PRODVX APPC-10XPL Poe LED Android Touch Display
Produktuaren zehaztapenak
- Android OS (preinstalled)
- VESA 75 mount Screw spec: M4*4 mm
- Back / home button
- SD-Card slot (with cover)
- ON / OFF botoia
- 12 V DC sarrera
- 3.5 mm jack in/out
- HDMI irteera
- Micro-USB / OTG USB 2.0 port
- LAN ataka
- Remote Device Management tools with Kiosk functionality
- Optional accessories: Barcode scanner, NFC module, Camera, RGB LED bar
Produktuak erabiltzeko jarraibideak
Instalazioa:
- Atera edukia kutxatik eta ziurtatu osagai guztiak daudela.
- Install the wall/glass mount or desk stand following the designated mount/stand manual instructions. Use a manual screwdriver instead of power tools to prevent damage to the device.
- Connect the device to power via PoE+ or a power adapter (optional accessory).
- Connect to the Internet through LAN or Wi-Fi.
- Configure the ProDVX device for your production environment.
Pakete honek badu
Nola hasi
- 1. urratsa: Take the contents out of the box, and make sure all components are present.
- 2. urratsa: Install the wall/glass mount or desk stand, and check the designated mount/stand manual for instructions. We strongly advise using a manual screwdriver instead of power tools due to the risk of causing damage to the device.
- 3. urratsa: Connect to power via PoE+ or power adapter (optional accessory).
- 4. urratsa: Connect to the Internet through LAN or Wi-Fi.
- 5. urratsa: Configure the ProDVX device for your production environment.
IOverview
Start and configure the ProDVX device.
- 1. urratsa: piztu
Power on the device by connecting either: PoE+ cable or a Power adapter - Urratsera 2: Hasierako konfigurazioa
Aukeratu konfigurazio metodo hauetako bat:
- A. Skip Wizard
All configuration elements and additional features will remain in their disabled/default state. - B. Network Setup
- Configure the Network connection from the start.
- Oharra: Ethernet connection must be disabled to use Wi-Fi.
- C. Upload Configuration
Upload a pre-defined configuration in JSON format. - D. Start Wizard
- Proceed through the wizard to configure ProDVX features.
- Set screen sleep interval, or Default for automatic sleep after 30 minutes of inactivity (EcoDesign).
- A. Skip Wizard
- Step 3: Apply Configuration
Once the configuration is complete, the device will automatically reboot to apply the changes. - Step 4: Additional Setup (if applicable)
- Configure IEEE 802.1X for LAN or Wi-Fi connection.
- Instalatu eta konfiguratu hobetsitako aplikazioak.
Aukerako osagarriak
FCC OHARRA
Kontuz:
Please note this product contains a battery. Please return the product to a certified repair center for proper replacement of the battery. Disposal of a battery can be dangerous.
OHARRA:
Unitate honetan egindako aldaketak edo aldaketek berariaz onartzen ez duten alderdiak betetzeaz arduratzen den alderdiak erabiltzailearen eskumena baliogabetu dezake ekipamendua erabiltzeko.
OHARRA:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area can cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua honako bi baldintza hauen menpe dago:
- Baliteke gailu honek ez du interferentzia kaltegarririk eragin
- gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.
Europa/Erresuma Batua – EB/Erresuma Batuko Adostasun Adierazpena
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove the presumption of conformity with the essential requirements of the Radio Equipment Directive. This equipment is compliant with Class A of EN55032. In a residential environment ment this equipment may cause radio interference.
Produktu hau zuzen botatzea.
- Marka honek adierazten du produktu hau ez dela beste (etxeko) hondakinekin bota behar. Kontrolik gabeko hondakinak botatzeak ingurumenean edo gizakion osasunean eragin ditzakeen kalteak ekiditeko, birzikla ezazu arduraz, baliabide materialen berrerabilpen iraunkorra sustatzeko. Erabilitako gailua itzultzeko, erabili itzultzeko eta biltzeko sistemak edo jarri harremanetan produktua erosi den saltzailearekin. Produktu hau ingurumenarekiko seguru birziklatzeko har dezakete.
- FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC & CE’s RF exposure guidelines, place the product at least 20cm from nearby persons.”
- The suitable temperature for the ProDVX Display and accessories is 0°C-40°C. Please note that using the device at temperatures above or below the specified range is not permitted.
Ohiko galderak
Zer egin behar dut gailua gehiegi berotzen bada?
Make sure the device is mounted correctly on a wall or surface as recommended. Avoid using it on a flat horizontal surface to prevent heat entrapment.
How can I dispose of the battery in the product?
Please return the product to a certified repair center for proper replacement of the battery. Battery disposal can be dangerous and should be handled with care.
Can I use power tools to attach the device to the mount or stand?
It is preferred not to use power tools as they may cause damage to the device. Please use a manual screwdriver for installation.
Dokumentuak / Baliabideak
 |
PRODVX APPC-10XPL Poe LED Android Touch Display [pdfErabiltzailearen gida APPC-10XPL Poe LED Android Touch Display, APPC-10XPL, Poe LED Android Touch Display, Android Touch Display, Touch Display |