A Whitepaper Giving a
High-Level Overview of Audio
Options on Raspberry Pi SBCs
Raspberry Pi Ltd
Kolofoia
© 2022-2025 Raspberry Pi Ltd
This documentation is licensed under a Creative Commons Attribution-No Derivatives 4.0 International (CC BY-ND).
1.0 bertsioa
Build date: 28/05/2025
Lege-oharra
RASPBERRY PI PRODUKTUEN DATU TEKNIKOAK ETA FIDAGARRITASUNAK (DATU FITXAK BARNE) ALDIAK ALDATZEN DITUZTEN ("BALIABIDEAK") RASPBERRY PI LTD ("RPL") EDOZEIN BERME ADIERAZKI EDO INPLIZITUTAKO EDOZEIN BERME ESPARIALAK EDO INPLIZITUAK EMATEN DITU, BAINA EZ MUGATUTA. ERABILTZEKO ETA HELBURU BEREZI BATERAKO EGOKITASUNAREN BERME INPLIZITUEI EZKOAK DIRA. APLIKATZEKO LEGEAK BAIMENDUTAKO GEHIEN MUTEAN, RPL EZ DA EZ DUTE ZUZENEKO, ZEHARKAKO, BEHARREZKO, BEREZKO, EREENTZEKO EDO ONDORIOKO KALATEEN ERANTZUKIZUNA IZANGO (BARATE, ORDEZKO ONDASUNEN EROSKETA, DATUEN ORDEZKO ONDASUNEN EROSKETA; EDO IRABAKIAK; EDO NEGOZIO-ETENA) DEN ERAGARRI ETA EDOZEIN TEORIARI BURUZKOA, KONTRATUAN, ERANTZUKIZUN ZORTZEAN EDO ARABERA (DESKLIZITZA EDO BESTELAK BARNE), BALIABIDEEN ERABILERAK ERABILTZEKO EDOZEIN ERABILTZEN DAGOEN, AHOLTASUNEZ ERE. HORRELAKO KALTEAK.
RPL-k beretzat gordetzen du edozein hobekuntza, hobekuntza, zuzenketa edo beste edozein aldaketa egiteko BALIABIDEetan edo horietan deskribatutako produktuetan edozein unetan eta beste abisurik gabe.
The RESOURCES are intended for skilled users with suitable levels of design knowledge. Users are solely responsible for their selection and use of the RESOURCES and any application of the products described in them. User agrees to indemnify and hold RPL harmless against all liabilities, costs, damages or other losses arising out of their use of the RESOURCES. RPL grants users permission to use the RESOURCES solely in conjunction with the Raspberry Pi products. All other use of the RESOURCES is prohibited. No licence is granted to any other RPL or other third party intellectual property right.
HIGH RISK ACTIVITIES. Raspberry Pi products are not designed, manufactured or intended for use in hazardous environments requiring fail safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems or safety-critical applications (including life support systems and other medical devices), in which the failure of the products could lead directly to death, personal injury or severe physical or environmental damage (“High Risk Activities”). RPL specifically disclaims any express or implied warranty of fitness for High Risk Activities and accepts no liability for use or inclusions of Raspberry Pi products in High Risk Activities. Raspberry Pi products are provided subject to RPL’s Baldintza estandarrak. RPL’s provision of the RESOURCES does not expand or otherwise modify RPL’s Baldintza estandarrak bertan adierazitako uko-oharrak eta bermeak barne, baina ez horietara mugatuta.
Dokumentuaren bertsio-historia
| Askatu | Data | Deskribapena |
| 1 | 1-apirilak-25 | Hasierako kaleratzea |
Dokumentuaren esparrua
Dokumentu hau Raspberry Pi produktu hauei aplikatzen zaie:
| PI 0 | PI 1 | Pi 2 | Pi 3 | Pi 4 | Pi 400 | Pi 5 | Pi 500 | CM1 | CM3 | CM4 | CM5 | Pico | Pico2 | ||||
| 0 | W | H | A | B | A | B | B | Denak | Denak | Denak | Denak | Denak | Denak | Denak | Denak | Denak | Denak |
| ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
Sarrera
Over the years, the options available for audio output on Raspberry Pi SBCs (single-board computers) have become more numerous, and the way they are driven from software has changed.
This document will go through many of the available options for audio output on your Raspberry Pi device and provide instructions on how to use audio options from the desktop and the command line.
This whitepaper assumes that the Raspberry Pi device is running Raspberry Pi OS and is fully up to date with the latest firmware and kernels.
Raspberry Pi audio hardwarea
HDMI
All Raspberry Pi SBCs have an HDMI connector that supports HDMI audio. Connecting your Raspberry Pi SBC to a monitor or television with speakers will automatically enable HDMI audio output through those speakers. HDMI audio is a high-quality digital signal, so the results can be very good, and multichannel audio like DTS is supported.
If you are using HDMI video but want the audio signal to split off — for example, bati amplifier that does not support HDMI input — then you will need to use an additional piece of hardware called a splitter to extract the audio signal from the HDMI signal. This can be expensive, but there are other options, and these are described below.
PCM/3.5 mm-ko jack analogikoa
Raspberry Pi B+, 2, 3 eta 4 modeloek 4 poloko 3.5 mm-ko audio-jack bat dute, audio eta bideo konposatu seinaleak onar ditzakeena. PCM (pultsu-kode modulazioa) seinale batetik sortutako kalitate baxuko irteera analogikoa da, baina oraindik ere egokia da entzungailuetarako eta mahaigaineko bozgorailuetarako.
OHARRA
There is no analogue audio output on Raspberry Pi 5.
Jack entxufearen seinaleak hurrengo taulan definitzen dira, kablearen muturretik hasi eta puntan amaituz. Kableak esleipen desberdinekin daude eskuragarri, beraz, ziurtatu zuzena duzula.
| Jack segment | Seinalea |
| Mahuka | Bideoa |
| 2. eraztuna | Lurra |
| 1. eraztuna | Eskuin |
| Aholkua | Ezkerra |
I2S oinarritutako egokitzaile-plakak
All models of Raspberry Pi SBCs have an I2S peripheral available on the GPIO header. I2S is an electrical serial bus interface standard used to connect digital audio devices and communicate PCM audio data between peripherals in an electronic device. Raspberry Pi Ltd manufactures a range of audio boards that connect to the GPIO header and use the I2S interface to transfer audio data from the SoC (system on a chip) to the add-on board.
Oharra: Add-on boards that connect via the GPIO header and adhere to the appropriate specifications are known as HATs (Hardware Attached on Top). Their specifications can be found here: https://datasheets.raspberrypi.com/
The full range of audio HATs can be seen on the Raspberry Pi Ltd webgunea: https://www.raspberrypi.com/products/
There are also a large number of third-party HATs available for audio output, for exampPimoroni, HiFiBerry, Adafruit eta abarretatik datoz, eta hauek ezaugarri ugari eskaintzen dituzte.
USB audioa
If it is not possible to install a HAT, or you are looking for a quick and easy way to attach a jack plug for a headphone output or a microphone input, then a USB audio adapter is a good choice. These are simple, cheap devices that plug into one of the USB-A ports on the Raspberry Pi SBC.
Raspberry Pi OS includes drivers for USB audio by default; as soon as a device is plugged in, it should show up on the device menu that appears when the speaker icon on the taskbar is right-clicked.
The system will also automatically detect if the attached USB device has a microphone input and enable the appropriate support.
Bluetootha
Bluetooth audio refers to the wireless transmission of sound data via Bluetooth technology, which is very widely used. It enables the Raspberry Pi SBC to talk to Bluetooth speakers and headphones/earbuds, or any other audio device with Bluetooth support. The range is fairly short — about 10 m maximum.
Bluetooth devices need to be ‘paired’ with the Raspberry Pi SBC and will appear in the audio settings on the desktop once this is done. Bluetooth is installed by default on Raspberry Pi OS, with the Bluetooth logo appearing on the desktop taskbar on any devices that have Bluetooth hardware installed (either built in or via a Bluetooth USB dongle). When Bluetooth is enabled, the icon will be blue; when it is disabled, the icon will be grey.
Software laguntza
The underlying audio support software has changed considerably in the full Raspberry Pi OS image, and, for the end user, these changes are mostly transparent. The original sound subsystem used was ALSA. Pulse Audio succeeded ALSA, before being replaced by the current system, which is called Pipe Wire. This system has the same functionality as Pulse Audio, and a compatible API, but it also has extensions to handle video and other features, making the integration of video and audio much easier. Because Pipe Wire uses the same API as Pulse Audio, Pulse Audio utilities work fine on a Pipe Wire system.
These utilities are used in the examples behean.
To keep the image size down, Raspberry Pi OS Lite still uses ALSA to provide audio support and does not include any Pipe Wire, Pulse Audio, or Bluetooth audio libraries. However, it is possible to install the appropriate libraries to add those features as required, and this process is also described below.
Mahaigaina
Goian aipatu bezala, audio eragiketak mahaigaineko ataza-barran dagoen bozgorailuaren ikonoaren bidez kudeatzen dira. Ikonoan ezkerreko botoiarekin klik egitean bolumenaren graduatzailea eta isilarazteko botoia agertzen dira, eta eskuineko botoiarekin klik egitean, berriz, eskuragarri dauden audio gailuen zerrenda agertzen da. Egin klik erabili nahi duzun audio gailuan. Eskuineko botoiarekin klik eginez, aukera bat ere badago profesionaltasuna aldatzeko.filegailu bakoitzak erabiltzen dituenak. Profesional hauekfiles usually provide different quality levels.
If microphone support is enabled, a microphone icon will appear on the menu; right-clicking on this will bring up microphone specific menu options, such as input device selection, whilst left-clicking brings up input level settings.
Bluetootha
To pair a Bluetooth device, left-click on the Bluetooth icon on the taskbar, then select ‘Add Device’. The system will then start looking for available devices, which will need to be put into ‘Discover’ mode to be seen. Click on the device when it appears in the list and the devices should then pair. Once paired, the audio device will appear in the menu, which is selected by clicking the speaker icon on the taskbar.
Komando-lerroa
Because Pipe Wire uses the same API as Pulse Audio, the majority of the Pulse Audio commands used to control audio work on Pipe Wire. pacts is the standard way of controlling Pulse Audio: type man pactl into the command line for more details.
Prerequisites for Raspberry Pi OS Lite
On a full installation of Raspberry Pi OS, all the required command line applications and libraries are already installed. On the Lite version, however, Pipe Wire is not installed by default and must be manually installed to be able to play back sound.
To install the required libraries for Pipe Wire on Raspberry Pi OS Lite, please input the following: sudo apt install pipewire pipewire-pulse pipewire-audio pulseaudio-utils If you intend on running applications that use ALSA, you will also need to install the following: sudo apt install pipewire-alsa
Rebooting after installation is the easiest way to get everything up and running.
Audio playback examples
Display a list of installed Pulse audio modules in short form (the long form contains a lot of information and is difficult to read): $ pactl list modules short Display a list of Pulse Audio sinks in short form:
$ pactl zerrenda laburra da
On a Raspberry Pi 5 connected to an HDMI monitor with built-in audio and an additional USB sound card, this command gives the following output: $ pactl list sinks short
179 alsa_output.platform-107c701400.hdmi.hdmi-stereo Pipe Wire s32le 2ch 48000Hz SUSPENDED 265 alsa_output.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00.analog-stereo-output Pipe Wire s16le 2ch 48000Hz SUSPENDED
OHARRA
Raspberry Pi 5 does not have analogue out.
For a Raspberry Pi OS Lite install on a Raspberry Pi 4 — which has HDMI and analogue out — the following is returned: $ pactl list sinks short
69 alsa_output.platform-bcm2835_audio.stereo-fallback Pipe Wire s16le 2ch 48000Hz SUSPENDED
70 alsa_output.platform-107c701400.hdmi.hdmi-stereo Pipe Wire s32le 2ch 48000Hz SUSPENDED
Raspberry Pi OS Lite instalazio honetan HDMI audiorako lehenetsitako hargunea bistaratzeko eta aldatzeko (kontuan izan daitekeela dagoeneko lehenetsia izatea), idatzi hau:
$ pactl get-default-sink
alsa_output.platform-bcm2835_audio.stereo-fallback
$ pactl set-default-sink 70
$ pactl get-default-sink
alsa_output.platform-107c701400.hdmi.hdmi-stereo
Honela erreproduzitzeko.ampalegia, lehenik s-ra igo behar daampkatxea, kasu honetan lehenetsitako hustubidean. Hustubidea alda dezakezu bere izena gehituz paktl play-s-en amaieran.ampkomandoa:
$ pactl igoera-sampduample.mp3 sampizen
$ pactl play-sampduampizen
There is a Pulse Audio command that is even easier to use to play back audio:
$ paplay sample.mp3
pactl has an option to set the volume for the playback. Because the desktop uses Pulse Audio utilities to get and set audio information, the execution of these command line changes will also be reflected in the volume slider on the desktop.
Adibampbolumena % 10 murrizten du:
$ pactl multzo-sink-bolumena @DEFAULT_SINK@ -10%
Adibample-k bolumena %50ean ezartzen du:
$ pactl multzo-sink-bolumena @DEFAULT_SINK@ %50
There are many, many Pulse Audio commands that are not mentioned here. The Pulse Audio webgunea (https://www.freedesktop.org/wiki/Software/PulseAudio/) and the man pages for each command offer extensive information about the system.
Bluetootha
Controlling Bluetooth from the command line can be a complicated process. When using Raspberry Pi OS Lite, the appropriate commands are already installed. The most useful command is bluetoothctl, and some examples of it in use are provided below.
Make the device discoverable to other devices:
$ bluetoothctl aurkigarria piztuta
Egin gailua beste gailu batzuekin parekatzeko modukoa:
$ bluetoothctl parekagarria piztuta
Bilatu irismenean dauden Bluetooth gailuak:
$ bluetoothctl eskaneatzea aktibatuta
Desaktibatu eskaneatzea:
$ bluetoothctl scan off bluetoothctl also has an interactive mode, which is invoked by using the command with no parameters. The following example runs the interactive mode, where the list command is entered and the results shown, on a Raspberry Pi 4 running Raspberry Pi OS Lite Bookworm: $ bluetoothctl
Agentea erregistratuta
[bluetooth]# list
Controller D8:3A:DD:3B:00:00 Pi4Lite [default] [bluetooth]#
You can now type commands into the interpreter and they will be executed. A typical process for pairing with, and then connecting to, a device may read as follows: $ bluetoothctl
Agent registered [bluetooth]# discoverable on
Deskubrigarria aldatzea lortu da
[CHG] Controller D8:3A:DD:3B:00:00 Discoverable on [bluetooth]# pairable on
Parekatua aldatzea arrakastatsua da
[CHG] Controller D8:3A:DD:3B:00:00 Pairable on [bluetooth]# scan on
<inguruan dauden gailuen zerrenda luzea izan liteke>
[bluetooth]# pair [mac address of device, from the scan command or from the device itself, in the form xx:xx:xx:xx:xx:xx]
[bluetooth]# scan off
[bluetooth]# connect [same mac address]
The Bluetooth device should now appear in the list of sinks, as shown in this exampRaspberry Pi OS Lite instalazio batetik ateratako fitxategia:
$ pactl zerrenda laburra da
69 alsa_output.platform-bcm2835_audio.stereo-fallback Pipe Wire s16le 2ch 48000Hz SUSPENDED
70 alsa_output.platform-107c701400.hdmi.hdmi-stereo Pipe Wire s32le 2ch 48000Hz SUSPENDED
71 bluez_output.CA_3A_B2_CA_7C_55.1 Pipe Wire s32le 2ch 48000Hz SUSPENDED
$ pactl set-default-sink 71
$ paplay <example_audio_file>
Orain hau lehenetsi gisa ezarri eta audioa erreproduzitu dezakezu bertan.
Ondorioak
Raspberry Pi Ltd gailuetatik audio irteera bat sortzeko hainbat modu daude, erabiltzaileen behar gehienak asetzeko. Txosten honek mekanismo horiek azaldu ditu eta horietako askori buruzko informazioa eman du. Hemen aurkeztutako aholkuek azken erabiltzaileari bere proiekturako audio irteera eskema egokia aukeratzen lagunduko diotela espero da. Adibide sinpleaampAudio sistemak nola erabili azaltzen duten gidak eman dira, baina irakurleak audio eta Bluetooth komandoen eskuliburuak eta man orrialdeak kontsultatu beharko lituzke xehetasun gehiago lortzeko.
Raspberry Pi Raspberry Pi Ltd-ren marka komertziala da
Raspberry Pi Ltd
Dokumentuak / Baliabideak
 |
Raspberry Pi SBCS plaka bakarreko ordenagailua [pdfErabiltzailearen gida SBCS Ordenagailu Bakarrekoa, SBCS, Ordenagailu Bakarrekoa, Ordenagailu-ordenagailua, Ordenagailua |