SHARP EP-CA22 Banaketa Tresna

Sarrera

Androiderako software hau aplikagarri diren modeloak eta Android gailua Bluetooth bidez konektatzeko eta pantailako irudiak aplikagarri diren modeloetara banatzeko erabiltzen da.
Informazio garrantzitsua

• Software hau kalitate-kontrol zorrotzaren eta produktuaren ikuskapenaren ondoren bidali da. Hala ere, hutsegiterik aurkitzen baduzu, jarri harremanetan zure produktu-saltzailearekin.
• Mesedez, ulertu SHARP CORPORATIONek ez duela erantzukizunik hartzen bezeroak edo hirugarren batek erabiltzean egindako akatsen gaineko erantzukizunik, ezta software honen funtzionamendu-matxura edo kalteen gaineko erantzukizunik ere, legearen arabera indemnizazio-erantzukizuna aitortzen denean izan ezik.
• Ez da onartzen eskuliburu honen edo/eta software honen zati bat edo guztia transkribatzea edo bikoiztea gure konpainiaren baimenik gabe.
• Etengabeko hobekuntza-politikaren baitan, SHARP-ek produktua hobetzeko diseinu eta zehaztapen-aldaketak egiteko eskubidea du aldez aurretik jakinarazi gabe.
• Pantailak eta prozedurak adibidezampfitxategiak. Edukia edo xehetasunak alda daitezke pantailaren konfigurazioaren eta sistema eragilearen bertsioaren arabera, etab. Pantaila azalpen helburuetarako da.
• This manual does not contain the basic operating instructions for Android.

Markak

• Google, Google Chrome, ChromeOS, Google Play and Android are trademarks or registered trademarks of Google LLC.
• Gainerako marka eta produktu-izen guztiak beren titularren marka komertzialak edo erregistratutako marka komertzialak dira.

Sistemaren eskakizunak

Sistema eragilea	Android 12.0 edo berriagoa
Bluetootha	5.2 betetzea (Onartutako profesionalak)files: GAP eta SPP)

There is no guarantee that this software will operate with all Android devices.
Furthermore, screens, names, and other items differ depending on the Android device used.
This instruction manual contains general operating procedures.

Prestaketa

Instalatzen
Install this software on the Android device.
Install “ePaper Distribution Tool” from Google Play.

Monitore hau eta Android gailu bat parekatzea
Bring this monitor and Android device within the Bluetooth connection range and then operate them.

1. Enable Bluetooth on this monitor.
   Use ePaper Settings Tool. For details, refer to the instruction manual for ePaper Settings Tool.
2. Press and hold the PAIRING button on this monitor (for approximately 3 seconds).
   The indicator on this monitor flashes in blue. Perform the following operation while the indicator is flashing in blue (within approximately 5 minutes).
3. Start this software on the Android device.
   The “Device” screen is displayed.
4. Sakatu in the upper right area of the screen.
   The device list is displayed.
5. Tap this monitor to pair.
   Tap the device name beginning with “EP-CA22-”.
   A confirmation screen is displayed
6. Tap “PAIR”.
   After pairing completes, the “Device” screen is redisplayed.

Irudiak bidaltzea

Set “Content Playback Mode” on this monitor to “Slideshow” (factory setting).
You can change the content playback mode with ePaper Settings Tool.
Bring this monitor and Android device within the Bluetooth connection range and then operate them.

AHOLKUA
If a confirmation screen to allow access appears at first startup, select “Allow”.

1. Start this software
   The Device screen is displayed, and the device name of this monitor is displayed.
   If the device name of this monitor is not displayed, pairing was not successful. Perform pairing (See page 4).
2. Tap this monitor on the “Device” screen.
3. Sakatu in the upper right area of the screen.
   The File Selection screen is displayed.
   You can select images from the Android device storage and the cloud.
4. Tap the image files to send to this monitor.
   30 arte files hauta daitezke.
   PDFa files cannot be selected.
5. Once image selection is complete, tap “Select”.
   The selected images are displayed.
   This monitor displays them in this order. You can change the order by pressing and holding images and then dragging them.
6. If necessary, set the image quality.
   1. Tap the image files for which you want to set the image quality.
   2. Tap “Property”.
   3. Hautatu irudiaren kalitatea.
   4. Tap “Close”.
   5. Tap “Close”.
7. Set the change method for image display.
   1. Sakatu "Ezarpenak".
   2. Konfiguratu ezarpenak.Device Installation…………Specify the installation direction of this monitor.
      Image Rotation……………..Specify the rotation direction of the image.
      Auto Play…………………….. When this is set to on, use is in auto mode. The next image is displayed automatically at the interval set in “Auto Play Interval”.
      When this is set to off, use is in manual mode. If you press the MODE button on this monitor, the next image is displayed.
      Auto Play Interval………….Specify the interval to change the image when Auto Play is set to on.
      Changing the image display takes approximately 15 to 45 seconds (varies depending on the ambient temperature). The change interval includes also the time to change the display.
      The duration that an image is displayed will be shorter than the setting by that amount.
      Maintain Aspect Ratio……Specify whether or not to maintain the aspect ratio of the image file.
      Background color………….Specify the background color for when there are margins around the image.
      Transition Effects…………..Specify the transition effect for when the image is changed.
      3. Once the settings are complete, tap “Close”.
8. Send the data to this monitor.
   1. Tap “Send”.
   2. Select “Image files and settings” and tap “OK”.
      The selected images and the display change method setting are sent to this monitor.
      If you select “Only image files”, the selected images are sent to this monitor.
      If you select “Only settings”, the display change method setting is sent to this monitor.

Dokumentuak / Baliabideak

SHARP EP-CA22 Banaketa Tresna [pdf] Argibideen eskuliburua EP-CA22, EP-CA22 Banaketa Tresna, EP-CA22, Banaketa Tresna, Tresna

Erreferentziak

• Erabiltzailearen eskuliburua