slime Tube Patch Kit
PRODUKTUAREN ERABILERA JARRAIBIDEA
- 1. URRATSA
- Use the scuffer to lightly scuff the area around the puncture.
- The area to be covered by the patch should feel rough to the touch.
- 2. URRATSA
- Apply rubber cement onto the roughened surface.
- Gently work the rubber cement into the tube, spreading it evenly and scraping off any excess.
- 3. urratsa
- Remove the foil backing from the patch without touching the sticky surface.
- 4. urratsa
- Apply the patch (sticky side down) centered over the puncture and press firmly, especially around the edges.
- 5. urratsa
- Remove the clear plastic film and wait for the rubber cement to fully dry before reinflating your tube to the recommended pressure.
INFORMAZIO GEHIAGO
Dokumentuak / Baliabideak
 |
slime Tube Patch Kit [pdfArgibideak Tube Patch Kit, Patch Kit |