Solutions-LOGO

Solutions MS-TP Programmable Touch PanelSolutions-MS-TP-Programmable-Touch-Panel-PRODUCT

Copyright-oharra

Eskuliburu honetako eduki guztiak, zeinaren copyrightak gure korporazioarenak diren, ezin dira klonatu, kopiatu edo itzuli enpresaren baimenik gabe.
Dokumentu honetan aipatzen diren produktuen zehaztapenak eta informazioa erreferentziazkoak dira soilik. Edozein eduki aldatu, ezabatu edo eguneratu dezakegu edozein unetan eta aldez aurretik jakinarazi gabe.

FCCren oharra

Produktu honek FCC Arauen 15. zatia betetzen du. Eragiketak bi baldintza hauen menpe daude:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Produktu hau probatu da eta A Klaseko gailu digital baten mugak betetzen dituela ikusi da, FCC Arauetako 15. zatiaren arabera. Muga hauek etxebizitza-instalazio batean interferentzia kaltegarrien aurka arrazoizko babesa emateko diseinatuta daude. Ekipo honek erabilerak sortzen ditu eta irrati-maiztasunaren energia igor dezake eta, argibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati-komunikazioetan. Dena den, ez dago bermatzen instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek irrati- edo telebista-harreran interferentzia kaltegarriak eragiten baditu, eta hori ekipoa itzali eta piztuz jakin daiteke, erabiltzaileari gomendatzen zaio interferentziak zuzentzen saiatzea, neurri hauetako bat edo gehiago erabiliz:

  • Berbideratu edo lekuz aldatu antena hartzailea.
  • Handitu ekipoaren eta hargailuaren arteko bereizketa.
  • Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
  • Kontsultatu banatzaileari edo esperientziadun irrati/telebistako teknikari bati laguntza eskatzeko.

A klasea ITE
A klaseko ITE beste ITE guztien kategoria A klaseko ITE mugak betetzen ditu baina ez B klaseko ITE mugak. Ekipo horiek ez dira salmentan mugatu behar, baina erabilera argibideetan honako abisu hau sartu behar da:

Abisua
Ekipo hau egoitza-ingurunean erabiltzeak irrati-interferentziak sor ditzake.

EC Compliance Statement

(A klasea)

Produktu honek 2014/30/EB Zuzentarauarekin bateragarritasun elektromagnetikoarekin lotutako estatu kideetako legeen hurbilketari buruzko Kontseiluaren Zuzentarauetan ezarritako baldintzak betetzen dituela berresten da.

Surge Babesa

This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..

Kontuz
The network cable connection method required for this product is direct connection. Please do not cross-connect.

Solutions-MS-TP-Programmable-Touch-Panel-FIG-1

Sarrera

The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.

Ezaugarri nagusiak

  • ARM Cortex-A55 architecture 1.8Ghz
  • Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
  • 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
  • Dual-mode operation – functions as either a touchscreen central control or a user terminal.
  • Customizable interface and function configuration through PC software
  • Industriako sareko komunikazio-protokolo estandarrekin bat dator (TCP/IP, Http, UDP, Webentxufea)
  • Standard 1Gbps network port
  • Dual power supply mode, supporting POE or an independent DC power supply

Paketearen edukia

  • A1x Programmable Touch Panel (Wall-in)
  • 1x 3pin-3.81mm Phoenix Connectors (male)
  • 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
  • 1x horman muntatzeko euskarria
  • 2x Bracket Fixing Screw
  • 1x Erabiltzailearen eskuliburua

Zehaztapenak

Teknikoa
CPU: ARM Cortex-A55 1.8 GHz
Sistema eragilea: Android 11
RAM: 4 GB DDR4 RAM
Flash memoria: 32 GB EMMC Flasha
Ebazpena: 720*720
Ukipen mota: Ukipen-pantaila kapazitiboa
ESD babesa: IEC 61000-4-2: ± 8kV (Aire-hutsunearen deskarga) eta ± 4kV (Kontaktuaren deskarga)
Konexioa
RS232: 1 x 3 pin Phoenix konektoreak
LAN/POE: 1x 10M/100M/1000M Ethernet RJ45 ataka estandarra, POE funtzioa onartzen duena
POTENTZIA: 1x 2-pin Phoenix Connectors, for power supply or POE
ARAZKETA: 1x Micro USB, system debugging port
Mekanikoa
Etxebizitza: Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic
Kolorea: Front Pane: Back; Frame: Gray Rear Case: White
Neurriak: 86 mm (L) x 86 mm (W) x 44 mm (D)
Pisua: 192 g
Energia hornidura: 24V DC/1A edo POE
Energia kontsumoa: 5W
Funtzionamendu-tenperatura: 0 °C ~ 40 °C / 32 °F ~ 104 °F
Biltegiratze tenperatura: -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C
Funtzionamenduaren hezetasuna: % 20 ~ % 80 (hezetasun erlatiboa, kondentsaziorik gabekoa)
Biltegiratzeko hezetasuna: % 10 ~ % 90 (hezetasun erlatiboa, kondentsaziorik gabekoa)

Eragiketa-kontrolak eta funtzioak

Solutions-MS-TP-Programmable-Touch-Panel-FIG-2

Zenbakia Izena Funtzioaren deskribapena
1 Ukipen-pantaila Capacitive touch screen. The user contro interface can be configured through the configuration too .
 

 

 

 

2

 

 

 

 

RESET botoia

Reboot: After the device boots up, press and ho d the RESET button for more than 1s

less than 5s, then release it, the device wi reboot. The device won’t upload the user

projects after rebooting.

Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information.

The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization.

3 POWER botoia Pantaila itzaltzeko edo esnatzeko erabiltzen da.
4 USB ataka Mikro USB ataka. Sistema arazketarako gordetako ataka.
 

 

5

 

LAN/PoE ataka

Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0
6 POWER ataka The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply.
 

7

 

RS232 ataka

Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX.

Muntatzeko Argibideak

This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:

1. urratsa: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.

Solutions-MS-TP-Programmable-Touch-Panel-FIG-3

2. urratsa: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.

Solutions-MS-TP-Programmable-Touch-Panel-FIG-4

To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.

Solutions-MS-TP-Programmable-Touch-Panel-FIG-5

www.m4sol.com

Ohiko galderak

Q: Can I use this touch panel without surge protection?

A: While surge protection is highly recommended, the touch panel can function without it. However, using surge protection will extend the equipment's lifespan.

Q: What type of network connection is required for this product?

A: The product requires a direct network cable connection method. Do not cross-connect the network cables.

Dokumentuak / Baliabideak

Solutions MS-TP Programmable Touch Panel [pdfErabiltzailearen gida
MS-TP Programmable Touch Panel, MS-TP, Programmable Touch Panel, Touch Panel, Panel

Erreferentziak

Utzi iruzkin bat

Zure helbide elektronikoa ez da argitaratuko. Beharrezko eremuak markatuta daude *