TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Zehaztapenak

• Eredua: 103.G
• Bateragarritasuna: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Konektibitatea: Bluetooth, 2.4G Wireless, USB (Type-C)
• Lan bolumenatage: DC 3.7V
• Lan-korrontea: < 30 mA
• Lo-korrontea: < 5uA
• Kargatzen Voltage/Gaur egungoa: DC 5V/500mA

Arazoak konpontzea

• Kontrolatzailea ez da konektatzen:
  • Ziurtatu kontrolatzailea guztiz kargatuta dagoela.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Ziurtatu Bluetootha gaituta dagoela zure gailuan.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Erantzuten ez duten botoiak:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Sarrerako atzerapena:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Gutxitu beste haririk gabeko gailuen interferentziak.
  • Try connecting via USB cable if available.
• Kontrolatzailea ez da kargatzen:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Saiatu beste C motako kable edo korronte-egokitzaile batekin.
  • The LED indicator should show the charging status.

Q103 Diagrama funtzionala

1. D-pad botoia
2. X/Y/A/B botoia
3. HOME Reconnect/Power Button
4. Parekatu botoia
5. HAUTATU botoia
6. TURBO Botoia
7. Ezkerreko Joystick/L3 botoia
8. Eskuineko Joystick/R3 botoia
9. CLEAR botoia
10. HASI botoia
11. L botoia
12. L2 botoia
13. C motako karga-ataka
14. R2 botoia
15. R botoia
16. Berrezarri zuloa
17. LED
18. Modu aldatzailea

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 eta gehiago

Bluetooth konexioa

1. Biratu etengailua: aldatu X-ra X- INPUT moduan sartzeko.
2. Lehen erabilera (pizteko parekatzea):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • LEDa beti dago gorria berriro konektatzen denean.
3. Erabili berriro (Birkonexioa):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. LEDa beti dago gorria berriro konektatzen denean.
4. Press the PAIR button to power off the device.

SWITCH modua

Bluetooth konexioa

1. Biratu etengailua: aldatu S-ra Switch moduan sartzeko.
2. Lehen erabilera (pizteko parekatzea):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LEDa beti berdea da berriro konektatzen denean.
3. Erabili berriro (Birkonexioa):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus Androiderako

Android 9.0 eta berriagoa

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Lehen erabilera (pizteko parekatzea):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Erabili berriro (Birkonexioa):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Sakatu Parekatu botoia gailua itzaltzeko.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Firmware-berritzea

1. Konektatu V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Joystick ezarpenak

• Rocker kalibrazioa
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Parametro elektrikoak

• Lan bolumenatage: DC3.7V
• Laneko korrontea: <30mA
• Loaren korrontea: < 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Egonean denbora: 30 egun (guztiz kargatuta)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Lo egiteko / esnatzeko funtzioa:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

FCC abisua

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Berbideratu edo lekuz aldatu antena hartzailea.
• Handitu ekipoaren eta hargailuaren arteko bereizketa.
• Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
• Kontsultatu banatzaileari edo irrati/telebistako teknikari esperientziadun bati laguntza lortzeko.

Kontuz: Fabrikatzaileak berariaz onartzen ez duen gailu honetan egindako aldaketak edo aldaketek ekipo hau ustiatzeko baimena baliogabetu dezakete.
Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua honako bi baldintza hauen menpe dago:

1. Baliteke gailu honek ez du interferentzia kaltegarririk eragin, eta
2. Gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.

Ekipo honek kontrolatu gabeko ingurune baterako ezarritako FCC erradiazioaren esposizio-mugak betetzen ditu. Ekipo hau erradiadorearen eta gorputzaren artean gutxienez 0 cm-ko distantziara instalatu eta funtzionatu behar da.