USAutomatic LCR 2-Button Basic Transmitter Instruction Manual

USAutomatic LCR 2-Button Basic Transmitter

Informazio orokorra

• The Transmitter has been designed to control automatic opening systems and anti-burglar systems.
• The operating frequency is 433.92 MHz.
• During installation, the receiver must be connected to the device it controls (gate, rolling shutters, awnings, anti-burglar appliances, lighting).
• The transmitter security code is created by 9 ways three-position dipswitches. This allows up to 19,683 code combinations.
• All the receivers for this transmitter type can store the code for multiple transmitters into the receiver’s memory.
• Each transmitter ( or its different buttons) can also be stored into multiple receivers to perform additional functions. 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations.

Zehaztapen teknikoak

• Number of keys: Supply: 2 / 4
• Bateria mota: 1 Alkaline Battery 12V type 23A
• Bateriaren iraupena: 12-18 hilabete
• Egungo kontsumoa: 25 mA
• Eragiketa maiztasuna: 433.92 MHz
• Kode konbinazioak: 19683
• Modulazioa: AM / ESKATU
• Rated e.r.p.: 50 – 100 μW
• Espazio librean: 180-360 oin
• Funtzionamendu-tenperatura: 0 – 130 °F
• Dimentsio orokorrak: 3.26 x 1.88 x 0.62 hazbete
• Pisua: 20 gr.

Ezaugarri nagusiak

• 2 button dip-switch transmitter: 030210. elementua
• 4 button dip-switch transmitter: 030212. elementua

SEGURTASUN KODEA

• Slide the access panel to the left to access the battery and the dip-switches.
• The position of the dip-switches create the security code. Warning: each transmitter is factory set with a default code.
• To help prevent unauthorized access, you must change this code by changing the positions of the dip-switches to a random pattern. Multiple transmitters can use the same switch pattern to simplify programming.

PROGRAMAZIOA

• The transmitter code has to be stored into the receiver memory before use.
• Simply hold down the button on the transmitter you want to use. While holding the transmitter button down, press the appropriate programming button (P1 or P2) on the receiver. Once the receiver indicator lights up, you are done. Any additional transmitters that are set to the same security code are also programmed at this time.
• Contact your dealer or distributor for additional functionality.

BATERIA ETA DIP-SWITCH SARBIDEA

• To access the battery rotate the access panel to the left. Place the 23A alkaline battery between the 2 contacts. Ensure the polarity is correct, as indicated on the bottom of the case.
• OHARRA: Please dispose of used batteries properly. They are hazardous waste.

BERMEA

USAutomatic, LLC warrants this product to be free of defects in materials and workmanship for 1 YEAR. For a period of 1 YEAR following purchase, USAutomatic, LLC. will repair or replace the product free of charge, including parts, shop labor and return to customer shipping and handling.
URTE 1eko berme honek ez du estaltzen plastikozko zorroa ohiko higaduragatik edo erabilera okerraren ondoriozko kalteengatik.
Produktua berme gisa bidaltzeko, erosketa-frogarekin eta itzultzeko baimen-zenbaki batekin itzuli behar da. Itzultzeko baimen-zenbakia lortzeko, deitu 1-888-204-0174 telefonora laguntza eskatzeko. Itzultzeko baimen-zenbakia argi eta garbi markatuta egon behar da itzultzeko paketearen kanpoaldean, edo baliteke ez onartzea.

Mota: SETDS39433
FCC IDa: PWJDS433
Gailu honek zatia betetzen du. FCC Arauetako 15

Funtzionamendua honako bi baldintza hauen menpe dago:

1. Baliteke gailu honek ez du interferentzia kaltegarririk eragin, eta
2. Gailu honek jasotako interferentziak onartu behar ditu, nahi ez diren funtzionamenduak sor ditzakeen interferentziak barne.

Oharra: Any changes or modifications to this equipment not expressly approved by USAutomatic could void the user’s authority to operate this equipment.

HARREMANETARAKO INFORMAZIOA

• www.usautomaticgateopeners.com
• (888)-378-1170
• sales@usautomaticgateopeners.com