Sarrera
Eskerrik asko erosketagatik.asing the Acctim Auric 12342 Superbrite Crescendo Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use and retain it for future reference.
Segurtasun informazio garrantzitsua
- Ez jarri unitatea tenperatura altuen, eguzki-argiaren eraginpean edo hezetasun handiaren eraginpean.
- Saihestu unitatea erortzea edo kolpe gogorren eraginpean jartzea.
- Ez saiatu unitatea desmuntatzen edo aldatzen. Horrek bermea baliogabetuko du.
- Use only the specified battery type (2 x AA batteries).
- Bota ezazu bateria zaharrak arduraz tokiko araudiaren arabera.
- Mantendu haurren eskura.
Paketearen edukia
- Acctim Auric 12342 Digital Alarm Clock
- Erabiltzailearen eskuliburua (dokumentu hau)
Oharra: 2 x AA batteries are required and are ez paketean sartuta.
Produktuaren Ezaugarriak
1. irudia: Aurrealdea view of the Acctim Auric 12342 digital alarm clock, showcasing its large LCD display and compact design.
- Large digit LCD display
- Battery operated for portability
- Superbrite blue backlight for clear visibility
- Crescendo alarm with increasing bolumena
- Errepikatzeko funtzioa
- Diseinu dotorea
- AM / PM adierazlea
Produktua amaituview
Familiarize yourself with the alarm clock's components before operation.
2. irudia: Goiena view of the Acctim Auric 12342 alarm clock, illustrating the control buttons and approximate dimensions. The large button at the top is for SNOOZE/LIGHT. Below it are the MIN and HR buttons for setting time and alarm. A slider switch is visible for selecting Time Set (T.SET), Alarm Set (AL.SET), Alarm On (AL.ON), and Alarm Off (AL.OFF) functions.
- ATZERATU/ARGI botoia: Activates the backlight and snooze function.
- HR botoia: Adjusts the hour for time and alarm settings.
- MIN botoia: Adjusts the minute for time and alarm settings.
- Function Slider Switch:
- T.SET: Time Setting mode.
- AL.SET: Alarm Setting mode.
- AL.ON: Alarm On.
- AL.OFF: Alarma desaktibatuta.
- LCD pantaila: Shows time, AM/PM indicator, and alarm status.
Konfigurazioa
1. Bateriaren instalazioa
- Bilatu bateriaren konpartimentuaren estalkia alarma-erlojuaren atzealdean.
- Remove the cover by sliding or lifting it.
- Insert 2 new AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Jarri bateriaren konpartimenduaren estalkia ongi.
The clock will power on automatically once batteries are inserted. The display may flash, indicating it's ready for time setting.
Funtzionamendu-argibideak
1. Ordua ezartzea
- Slide the Function Switch to the T.SET position. The time digits will start flashing.
- Sakatu HR button repeatedly to set the hour. Observe the AM/PM indicator for correct 12-hour format.
- Sakatu MIN button repeatedly to set the minutes.
- Once the desired time is set, slide the Function Switch back to the AL.OFF or AL.ON position to save the time.
2. Alarma ezartzea
- Slide the Function Switch to the AL.SET position. The alarm time digits will start flashing.
- Sakatu HR button repeatedly to set the alarm hour. Observe the AM/PM indicator.
- Sakatu MIN button repeatedly to set the alarm minutes.
- Once the desired alarm time is set, slide the Function Switch back to the AL.ON position to activate the alarm, or AL.OFF desaktibatzeko.
3. Alarma aktibatzea/desaktibatzea
- To activate the alarm, slide the Function Switch to the AL.ON position. An alarm icon will appear on the display.
- To deactivate the alarm, slide the Function Switch to the AL.OFF position. The alarm icon will disappear.
4. Using the Snooze and Backlight Function
- Alarma jotzen duenean, sakatu botoi handia SNOOZE / ARGIA button on top of the clock to temporarily stop the alarm. The alarm will sound again after approximately 4-5 minutes.
- To activate the blue backlight at any time, press the large SNOOZE / ARGIA button. The backlight will illuminate for a few seconds.
Mantentzea
- Garbiketa: Garbitu erlojua zapi leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Bateria ordezkatzea: When the display dims or the alarm function becomes unreliable, replace both AA batteries with new ones. Follow the battery installation steps in the Setup section.
- Biltegiratzea: Erlojua denbora luzez erabiliko ez bada, kendu pilak isuriak saihesteko.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Erlojuaren pantaila hutsik edo ilun dago. | Bateriak gutxi daude edo gaizki instalatuta daude. | Ordeztu AA pila berriekin, polaritate zuzena ziurtatuz. |
| Alarmak ez du jotzen. | Alarm is not activated (AL.OFF). Alarm time is incorrectly set. | Slide the Function Switch to AL.ON. Check and reset the alarm time. |
| Time or alarm cannot be set. | Function Switch is not in the correct position. | Ensure the Function Switch is set to T.SET for time or AL.SET alarmarako. |
| Atzeko argia ez dabil. | Pilak gutxi daude. | Ordeztu AA bateria berriekin. |
Zehaztapenak
- Marka: Acctim
- Modelo zenbakia: 12342
- Kolorea: Zuria
- Materiala: Plastikoa
- Bistaratzeko mota: LCD digitala
- Energia iturria: Battery powered (2 x AA batteries, not included)
- Produktuaren neurriak (L x W x H): 5.21 x 3.81 x 10.49 cm (gutxi gorabehera 2.05 x 1.5 x 4.13 hazbete)
- Elementuaren pisua: 102 gramo (gutxi gorabehera 0.22 lb)
- Ezaugarri bereziak: Alarm, Snooze, Superbrite Blue Backlight, Crescendo Alarm
- Barruan/Kanpoan erabilera: Barruan
Bermea eta Laguntza
The Acctim Auric 12342 Digital Alarm Clock comes with a urtebeteko bermea from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact Acctim customer service through their official webproduktua erosi zen gunea edo dendaria.
Gorde erosketaren egiaztagiria bermearen ondorioetarako.
