Claber Aquauno 8423 Select Ur-tenporizadorearen argibideen eskuliburua

Sarrera

The Claber Aquauno Select Water Timer is designed to simplify your watering routine with its flexible programming options and user-friendly interface. This single-line timer features two intuitive dials, offering a wide range of 63 preset programs to suit various watering needs. Its sealed, watertight electrical circuitry ensures reliable operation in diverse outdoor environments, while a built-in washable filter helps prevent blockages and damage from contaminants. The timer operates efficiently within a pressure range of 1.2 to 12 Bar, making it suitable for both domestic and larger-scale watering systems.

Image: The Claber Aquauno 8423 Select Water Timer, a black and orange device with two large orange dials for setting watering duration and frequency.

Paketearen edukia

Paketea irekitzean, ziurtatu osagai guztiak daudela eta kalterik gabe daudela:

• Claber Aquauno 8423 Select Water Timer unit
• Argibide eskuliburua (dokumentu hau)

Oharra: A 9V alkaline battery is required for operation and is ez dago barne paketean.

Image: The retail packaging for the Claber Aquauno 8423 Select Water Timer, showing the device and key features on the box.

Konfigurazioa

Bateria jartzea

The Aquauno Select Water Timer requires one 9V alkaline battery for operation. It is crucial to install a new battery at the beginning of each watering season to ensure optimal performance and reliability.

1. Press the two side buttons on the timer unit to open the battery compartment cover.
2. Connect a new 9V alkaline battery to the battery connector inside the compartment.
3. Carefully insert the battery into the housing.
4. Snap the cover back into place, applying light pressure until it clicks securely.

For a visual guide, refer to the official product video at 0:20 - 0:43.

Instalazioa

Proper installation ensures a secure connection and leak-free operation of your water timer.

1. Screw the timer unit onto your water tap.
2. Ensure the external ring nut is tightened securely to prevent leaks.
3. Insert your garden hose into the bottom coupling of the timer.

Image: The Claber Aquauno 8423 Select Water Timer securely installed on an outdoor water tap, ready for hose connection.

For a visual guide, refer to the official product video at 1:02 - 1:20.

Funtzionamendua

Tenporizadorea programatzea

The Aquauno Select Water Timer offers 63 preset programs for flexible watering. Follow these steps to program your timer:

1. Turn the "Minutes" selector dial to choose the desired duration of the watering cycle (e.g., 5, 10, 15, 30, 60 minutes).
2. Turn the "Frequency" selector dial to set the interval between successive watering cycles (e.g., 8h, 12h, 24h, 2d, 3d, 5d, 7d).
3. Once a setting is made, the LED indicator will blink rapidly for a few seconds, then continue to blink slowly, confirming the program is set.
4. Ensure your water tap is fully open for the timer to operate. Watering will commence immediately after programming.

Image: A person adjusting the dials on the Claber Aquauno 8423 Select Water Timer to set the watering program.

For a visual guide, refer to the official product video at 1:22 - 1:51.

Eskuzko ureztatzea

To initiate a manual watering cycle, which runs for a fixed 5 minutes:

• Turn the "Frequency" selector dial to the "Hand" position (indicated by a hand icon or "5 MIN").

A 5-minute watering cycle will begin immediately. This manual cycle cannot be extended. To terminate it at any time, return the "Frequency" selector to its previously programmed position. This action will also ensure that your original programmed settings are retained.

For a visual guide, refer to the official product video at 1:53 - 2:21.

Changing a Watering Program (Duration)

You can adjust the duration of watering cycles. The method depends on whether a cycle is currently in progress or not.

Change to duration of watering with timer between cycles:

• Turn the "Minutes" selector to a different preset time from the one currently selected. The change will take effect from the next watering cycle.

Change to duration of watering with cycle in progress:

• Turn the "Minutes" selector to a different preset time from the one currently selected. The change will take effect immediately.
• If the new setting is for a duration shorter than the time already elapsed in the current cycle, the timer will interrupt the cycle immediately.

For a visual guide, refer to the official product video at 2:22 - 3:11.

Changing the Frequency of Watering

To change the frequency of watering, follow these steps. Kontuz ibili: This operation has the effect of canceling the program selected previously.

1. Wait for the new time at which the watering cycle is to start.
2. Position the "Frequency" selector at "OFF" and wait for the LED to extinguish.
3. Reposition the "Frequency" selector on the new preferred frequency.

After reprogramming, a watering cycle of the newly selected duration starts immediately. Subsequent cycles will start based on the newly selected frequency (number of hours or days).

For a visual guide, refer to the official product video at 3:12 - 3:50.

Mantentzea

Iragazkia garbitzea

The timer is equipped with a wire mesh filter to ensure long-lasting and trouble-free operation by trapping contaminants. Regular cleaning is recommended.

1. Unscrew the top collar of the timer.
2. Remove the wire mesh filter from its housing.
3. Wash the filter thoroughly under running water to remove any debris.
4. Reinsert the clean filter and screw the top collar back into place.

For a visual guide, refer to the official product video at 0:45 - 1:01.

Neguko babesa

To protect your timer from freezing temperatures and ensure its longevity, proper storage during winter is essential.

1. At the end of the warm season, and before the first winter frosts, disconnect the timer from the water tap.
2. Remove the 9V battery from the timer.
3. Store the device indoors, in a location protected from freezing temperatures and humidity.

Following these steps will help keep your timer in excellent condition for many years of use.

For a visual guide, refer to the official product video at 3:51 - 4:10.

Zehaztapenak

Arazoak konpontzea

While the Claber Aquauno 8423 Select Water Timer is designed for reliable operation, occasional issues may arise. Here are some common troubleshooting tips:

• Timer not watering:
  • Check if the 9V battery is new and correctly installed.
  • Ziurtatu uraren txorrota guztiz irekita dagoela.
  • Verify that the programming dials are set correctly and the LED is blinking slowly.
  • Check the filter for blockages (refer to "Cleaning the Filter" section).
• Water leaking from connections:
  • Ensure all connections (to tap and hose) are tightened securely.
  • Check for damaged O-rings or washers in the connections and replace if necessary.
• Inconsistent watering:
  • Confirm that the "Minutes" and "Frequency" dials are set to your desired program.
  • Ensure there are no external factors affecting water pressure.

If problems persist after following these steps, please contact Claber customer support.

Produktuaren bideo-gida ofiziala

Watch the official "Introducing Aquauno select timer" video for detailed visual instructions on setup, operation, and maintenance of your Claber Aquauno 8423 Select Water Timer.

This video is provided by Addigitale Store, a Seller of the product.

Bermea eta Laguntza

For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your purchase or visit the official Claber website. You may also contact the seller, InSale LTD, for assistance.

• Babes Planak: Additional protection plans may be available for purchase. Please check with your retailer or Amazon for details.
• Bezeroaren Reviews: For user experiences and common questions, refer to customer reviews on the product's retail page.